Catalogs >
PCI INSTRUMENTS LTD >
RTD (Resistance Thermometer Detector) with PT100 sensor

RTD (Resistance Thermometer Detector) with PT100 sensor
2Pages

Catalog excerpts

RTD (Resistance Thermometer Detector) with PT100 sensor - 1

Data sheet Date Page RESISTANCE TEMPERATURE DETECTORS FOR ALL PROCESS APPLICATIONS – RT100 ATEX MODEL High quality constructed RTDs with fast response and mineral insulated probes. APPLICATIONS • For all temperature measurements requiring short response timeMounting on pipes, and open or closed vessels • For a wide range of media: vapours, gases, liquids, non-abrasive substances • Special executions for explosive environments ATEX certified : 0496 ATEX 94/9/CE ATEX approvals available under our PCI TEMA brand. DESCRIPTION These “Thermo-Sensor” probes may be fitted with one or two resistance temperature detectors (RTDs). Each probe consists of a temperature sensor, a terminal head, and a process connection For explosive environments, executions meeting the requirements of EN 60079-0 “Electrical apparatus for potentially explosive atmospheres OPTIONS Temperature probes may be assembled on request with temperature transmitters directly mounted into the connection head or remote • analogue 4-20mA output • digital output “HART”® or “PROFIBUS” ® • thermowell • various connections available • lag extension • reduced tip • various terminal head types • duplex type (two RTD sensors) • ATEX version HOW TO ORDER Please specify: model, range, probe immersion and diameter, process connection, options if any Example : RT100, 0/100˚C,100mm x 6mm,1.1/2”IDF, 4/20mA (general requirements)”, EN 60079-1 (flameproof enclosure “d”) or EN 60079-11 (intrinsic safety “i”) are available. _______________________________________________________________________________________________ PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK, Tel: +44 (0) 1704 509090, Fax: +44 (0) 1704 509091, email: sales@pci-instruments.com, Website: www.pci-instruments.com (Specifications are subject to change without notice)

Open the catalog to page 1

RTD (Resistance Thermometer Detector) with PT100 sensor - 2

Data sheet Date Page THERMO-SENSOR 1. Terminal heads: Internal terminal board is used for every version when internal temperature transmitter is not mounted. Standard Head for ambient temperatures from 0 to + 200°C. Degree of protection: IP 65, according to execution. Cable gland: to be chosen according to the cable entry. EExd head Injected aluminium casting, degree of protection IP 65 for lag extension with incorporated sealing compression fitting. Limited installation position: maximum 60° from the vertical. If installed without lag extension, or mounting with connection head, the free...

Open the catalog to page 2