‘Quality Matters’ Phenolic Case Pressure Gauge PH100 Introduction The pressure gauges series PH100, can be installed on chemical and petrochemical plants with particularly aggressive environments, according to normative EN837-1/9.7.2 and ANSI B40.1.1. Specifications • Diameters: 4 %” • Case and ring: Phenol, black • Safety back: Phenol, black • Protection degree: IP65 • Transparent: stratified safety glass, gasket in neoprene • Movement: St. St., reinforced • Dial: aluminium with black numerals on white background • Pointer: Aluminium., black painted, micrometric adjustable • Blow out: Neoprene, upper • Sensing element: Bourdon tube type, with “C” form for pressure >60 bar, helical wound for pressure > 60 bar • Element material: AISI 316L , MONEL 400 • Connection material: AISI 316L, MONEL 400 • Connection dimension: ^”NPTM or BSPM • Mounting: type A bottom connection, direct mounting type D back connection, direct mounting • Ranges: see table at page 2 • Overpressure: +30% F.S. for range up to 60 bar +15% F.S. for ranges from 100 to 600 bar +10% F.S .for ranges from 1000 bar • Accuracy: class 1, acc. to EN837-1 at 20°C • Ambient temperature limit: -25/+60°C • Fluid temperature limit: -30/+160°C element in AISI316L -30/+230°C element in MONEL • Temperature error: 0,035%/°C in range 0/60°C • Construction acc. to ATEX directive 94/9/EC gr.II cat. 2GDc • Construction according to PED directive 97/23/EC Options • Overpressure 400% A.C. • Accuracy 0,5% • Spacers for wall mounting • Glycerine filling for T.amb.-25/+60°C • Silicon oil filling for T.amb.-40/+60°C • Filling with fluorinated oil suitable for use on Oxygen and for ambient temperature -60/60°C • Degreasing for use on Oxygen • Mounting with diaphragm seal (see related datasheet) • Electrical contacts (see related datasheet) • Pulsation dampener (see related datasheet) • Overpressure protector (see related datasheet) • Syphon (see related datasheet) • Needle valve (see related datasheet) Available certification • 2.1 certificate of conformity • 3.1 material certificate • Test certificate for indication accuracy • ATEX 94/9/EC conformity certificate (for ATEX version) How to order Please specify: model, mounting, range, connection, options, certificates Example: PH100, A, 0/10 bar, %” BSPM, Specifications are subject to change without notice

‘Quality Matters’ Phenolic Case Pressure Gauge PH100 Type PH100A: Direct mounting, bottom connection DSABCDFJKS Specifications are subject to change without notice Web: www.pci-instruments.com | Email: [email protected] | Tel: +44 (0)1704 509090