Data sheet Date Page ALL ST/ST PRESSURE GAUGE WITH PRESURE TRANSMITTER TRANSPRESS 100 TECHNICAL CHARACTERISTICS OF INDICATOR Diameter: 100 mm Case and ring: st. st. 304, bayonet type ring Transparent: safety stratified glass basket in EPDM Movement: st. st. reinforced Dial: aluminium with black numerals on white background Pointer: black steel with micrometric adjustment Blow out: neoprene, upper Sensing element: Bourdon tube type, with “C” form for pressure ≤60bar, helical wound for pressure ≥ 60bar Sensing element material: AISI 316L Connection material: AISI 316L Welding: T.I.G. Connection dimension: ½”NPTM or BSP Mounting: type A bottom connection, direct mounting type D back connection, direct mounting Ranges: see table at page 2 Overpressure: +30% F.S. for range up to 60bar +15% F.S. for ranges from 100 to 600bar Accuracy: class 0,5% at 20°C ; class 1 for oil filled case The pressure gauges series TRANSPRESS TR100 have been realized to be used on machine and plants where is required the local indication of the pressure and the remote transmission of a normalized signal to record or control the process. The instrument is made of 2 independent elements, a Bourdon tube pressure gauge and a piezoresistive sensor so the pressure value measured is always reliable even when one of the sensors is out of calibration The wetted parts in AISI316L, are suitable for a wide range of fluid. In case of application on incompatible fluids, a wide range of chemical seal is available. TECHNICAL CHARACTERISTICS OF TRANSMITTER Output signal: 4/20mA 2 wires Power supply: 8/24Vdc Accuracy: ± 0,5% f.s including linearity, hysteresis, repeatability Working temperature: -10/+80°C Compensated temperature range: 0/50°C Global error: 1% typical, max 2% in the range 0/50°C Shock: 20g sinusoidal, 11 m/sec Insulation: ≥ 10Mohms Load in Ohm: U- 8V ; 0,02 A Electrical connection: DIN43650 Case diameter 150mm Intrinsically Safe version EExiaIICT4/T6 Mounting with diaphragm seal Flush mounting back-flange Front flange for panel mounting Degreasing for use on Oxygen Internal dampener (screw on the connection) Electrical contacts Mounting with diaphragm seal HOW TO ORDER Please specify: model, mounting, case diameter, range, process connection, options if any Example:TR100, A, 100mm, 0/400bar, ½”BSPM _______________________________________________________________________________________________ PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK, Tel: +44 (0) 1704 509090, Fax: +44 (0) 1704 509091, email: [email protected], Website: www.pci-instruments.com (Specifications are subject to change without notice)

Data sheet Date Page Available on request double scale : bar/psi –bar/kPa – psi/kg/cm2 – kPa/psi Available on request double scale : 3/15 / 0/10 linear – 3/15 / 0/10 √ Available on request double scale : bar/Hg-psi –bar/kPa – Hg-psi/kg/cm2 – kPa/Hg-psi Type A: Direct mounting, radial connection Type D: Direct mounting, rear eccentric connection Weight/Kg filled _______________________________________________________________________________________________ TR100D 60 101 115 87 ½”G/NPT 0.900 1.2 /100 PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF,...