Catalogs >
PCI INSTRUMENTS LTD >
5 VALVE MANIFOLDS

5 VALVE MANIFOLDS
1 / 18Pages

Catalog excerpts

With threaded vertical port inlets and outlets. The isolating and venting bonnets are positioned on the left and right hand side and the equalizing bonnet is positioned on the front side. Designed for remote mounting. /ISOLATE ISOLATEY Drain Equalize Isolate PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK, email: sales@pci-instruments.com, Website: www.pci-instruments.com (specifications are subject to change without notice)

Open the catalog to page 1

With threaded vertical port inlets and outlets. The vent/test ports are positioned on the bottom and top of the body. The isolating bonnets are positioned on the left and right hand side and the venting and equalizing bonnets are positioned on the front side. Specially designed for remote mounting to field meters, differential transmitters and chart recorders on gas service allowing fail safe configuration preventing pressure loss from the high to low pressure impulse fines. 1/4" flat plugged plugged vert Standard connection Drain Equalize Isolate PCI (Process System Solutions) Ltd, Unit 7...

Open the catalog to page 2

Model for differential pressure gauges with 2 inlets NPT female at bottom and 2 outlets with rotating nuts on top side. Also available in 54mm tap spacings model - M5VD54. Standard connection Drain Equalize Isolate PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK, email: sales@pci-instruments.com, Website: www.pci-instruments.com (specifications are subject to change without notice)

Open the catalog to page 3

Mode! designed for complete isolation of instruments with NPT female inlets /outlets. Vent/test connection at bottom; equalizing bonnet angular on top-isolating bonnets angular on top venting bonnets at left and right side. Standard connection Drain Equalize Isolate PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK, email: sales@pci-instruments.com, Website: www.pci-instruments.com (specifications are subject to change without notice)

Open the catalog to page 4

With threaded female ports on front side and back side for instrument and process connections. The two vent bonnets along with equalizing bonnet are positioned on the top side. The two isolation bonnets are positioned on left and right hand sides. VENT/TEST PORTS - pljgged INSTRUMENT SIDE PROCESS SIDE Standard connection Drain Equalize Isolate PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK, email: sales@pci-instruments.com, Website: www.pci-instruments.com (specifications are subject to change without notice)

Open the catalog to page 5

Valve assembly Maximum working pressure Maximum working temperature: Drain port Bracket mounting holes Chrome plating PTFE (Grafoil to be used for temperature above 240c till 550c) Type CT; Stem with conical metal tip 1/4" NPT [F]; provided with SS 316 plug Body Material Stem Type ■ Stem Packing ■ Size = Inlet x Outlet ■ Connections I GH : Material test certificate I GO : Hydrotest test certificate ! TF : Sour gas service to NACE standard MR-01-75. ! SG : Oxygen service, {manifolds are supplied cleaned and degreased) ! DS : Valves with stem having soft conical and delrin tip rolled into the...

Open the catalog to page 6

With threaded horizontal port inlets and Flange port outlets. Three vent/test connections are pos itioned on the bottom of the body. The isolating, venting and equalizing bonnets are angular positioned on the top designed direct mounting. Standard connection □rain Equalize Isolate PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK, email: sales@pci-instruments.com, Website: www.pci-instruments.com (specifications are subject to change without notice)

Open the catalog to page 7

With threaded horizontal port inlets and Flange outlets. Two vent/test connections are positioned on the bottom of the body. The isolating and equalizing bonnets are angular positioned on the top side. The vending bonnets are positioned on the left & right hand side. Designed for direct mounting. PLUGGED VENT Standard connection Drain Equalize Isolate PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK, email: sales@pci-instruments.com, Website: www.pci-instruments.com (specifications are subject to change without notice)

Open the catalog to page 8

Standard version specifications of model M5VP, M5VS Valve assembly Maximum working pressure Maximum working temperature Drain port Chrome plating PTFE (Grafoil to be used for temperature above 24ufc till 550°C) Type CT; Stem with conical metal tip 1/4" NPT [F]; provided with SS 316 plug How to order : Valve Type - M5VP, M5VS Body Material Stem Type I Stem Packing I Size = Inlet x Outlet I Connections CT(std) P = PTFE(std) 2F = VAT x Flange SW = Socket Weld p = BSPPto BS2779 ! GH : Material test certificate ! GO : Hydrotest test certificate ! MBC : Mounting bolts available [7/16" UNF] in...

Open the catalog to page 9

Five Valve Manifold Special model to accommodate any half DIN 19213 interface complaint pressure transmitter, 2 inlets NPT female affront and 2 outlets Flange at back side DIN 19213, Vent/teat connection at front, equalizing bonnets at top side, isolating bonnets at left and right side-venting bonnet at top. Standard connection Drain Equalize Isolate PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK, email: sales@pci-instruments.com, Website: www.pci-instruments.com (specifications are subject to change without notice)

Open the catalog to page 10

With threaded horizontal port inlets and Flange port outlets. The vent/test ports are positioned on the bottom side. The isolating and venting bonnets are positioned on the left and right hand side and the equalizing bonnet is positioned on the top side. Designed for direct mounting. (ISOLATE ISOLATE) Drain Equalize Isolate PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK, email: sales@pci-instruments.com, Website: www.pci-instruments.com (specifications are subject to change without notice)

Open the catalog to page 11

With threaded female ports on front side for instrument connection along with extended Flange for process connection. The two vent bonnets along with equalizing bonnet is positioned on the top side. The two isolation bonnets are positioned on left and right hand sides. With Flange horizontal port inlets and Flange port outlets. The vent/test ports are positioned on the bottom side.The isolating and venting bonnets are positioned on the left and right hand side and the equalizing bonnet is positioned on the top side. Designed for direct mounting. Drain Equalize Isolate PCI (Process System...

Open the catalog to page 12