TEST INSTRUMENTS FOR INDUSTRY, TRADE AND RESEARCH
29Pages

{{requestButtons}}

Catalog excerpts

TEST INSTRUMENTS FOR INDUSTRY, TRADE AND RESEARCH - 1

TEST INSTRUMENTS FOR MESSTECHNIK FÜR DIE INDUSTRY, TRADE AND METALLVERARBEITENDE RESEARCH INDUSTRIE PCE Instruments Discover our new test instruments and their functions.

Open the catalog to page 1
TEST INSTRUMENTS FOR INDUSTRY, TRADE AND RESEARCH - 2

TEST INSTRUMENTS FROM GERMANY For industry, trade and research The company PCE Instruments based in Meschede-Freienohl in the German Sauerland region was founded in 1999 by three engineers. With more than 120 employees and several branches around the world, the company focuses on the development, production and distribution of high-performance and innovative products from the fields of measuring instruments, control systems, weighing equipment and laboratory technology. PCE Instruments‘ wide range of products and services offers high precision and flexibility in any application as well as...

Open the catalog to page 2
TEST INSTRUMENTS FOR INDUSTRY, TRADE AND RESEARCH - 3

HARDNESS TESTER PCE-2000N TECHNICAL SPECIFICATIONS Meter for metallic materials The PCE-2000N hardness tester from PCE-Instruments uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, hits a test surface at a defined impact energy. The impact of the hard metal ball on the test surface results in a plastic deformation of the surface at the point of impact. This deformation results in an energy loss which is proportional to the hardness of the workpiece and which can be determined by means of the ratio of...

Open the catalog to page 3
TEST INSTRUMENTS FOR INDUSTRY, TRADE AND RESEARCH - 4

HARDNESS TESTER PCE-900 TECHNICAL SPECIFICATIONS Leeb hardness tester for metals / measurement of tensile strength The Leeb hardness tester PCE-900 measures the hardness of nine different metals using the Leeb rebound method. This means that an impact body bounces on a metallic surface and the intensity of the rebound is used as an indicator of the material hardness. The hardness test instrument PCE-900 measures the metal hardness in 6 different hardness scales, including: Rockwell, Vickers, Leeb, Brinell and Shore. A distinction is made between Rockwell B and C when measuring in the...

Open the catalog to page 4
TEST INSTRUMENTS FOR INDUSTRY, TRADE AND RESEARCH - 5

CONDUCTIVITY TESTER FOR NFE METALS PCE-COM 20 TECHNICAL SPECIFICATIONS With wide measurement range of up to 112 % IACS or 65 MS/m The conductivity tester for measuring the electrical conductivity of non-ferrous metals such as aluminium or copper belongs to the group of NDT devices. The conductivity tester is used in non-destructive material testing. By means of the eddy current measuring principle which has proven for this application, the electrical conductivity of metallic materials can be determined quickly and precisely. With its operating frequency of 60 kHz, the conductivity tester...

Open the catalog to page 5
TEST INSTRUMENTS FOR INDUSTRY, TRADE AND RESEARCH - 6

COATING THICKNESS GAUGE PCE-CT 80 TECHNICAL SPECIFICATIONS Paint layer thickness gauge for Fe and NFe The paint layer thickness gauge PCE-CT 80 is a measuring device for the non-destructive measurement of coatings (lacquers, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the PCE-CT 80 paint coating thickness gauge, even difficult-to-reach measuring locations can be easily reached. The menu navigation of the paint thickness gauge allows easy adjustment and setting to new parameters and makes this handy paint coating thickness gauge...

Open the catalog to page 6
TEST INSTRUMENTS FOR INDUSTRY, TRADE AND RESEARCH - 7

COATING THICKNESS GAUGE PCE-CT 90 TECHNICAL SPECIFICATIONS Coating thicknesses on Fe and NFe metals With its standard sensor, the thickness gauge can measure coating thicknesses of up to 60 mm on various metal surfaces. Massive steel profiles as well as thin metal sheets are suitable as substrates. The thickness gauge can even be used on perforated plates, expanded metal plates, textured plates and wire mesh is the mesh size matches the sensor. On these subst rates, the thickness gauge measures the thickness of coatings or plate-shaped linings. These coatings can consist of several layers....

Open the catalog to page 7
TEST INSTRUMENTS FOR INDUSTRY, TRADE AND RESEARCH - 8

WALL THICKNESS GAUGE PCE-TG 300 WITH BLUETOOTH TECHNICAL SPECIFICATIONS With a wide measurement range of up to 600 mm The PCE-TG 300 is a wall thickness gauge with special probes for various applications. In general, the wall thicknesses of all homogeneous materials can be measured with the PCE-TG 300. For damping or scattering materials such as plastic or cast iron, a special probe is available. An angled 90 ° probe also enables measurements at hard-to-reach measuring positions. The speed of sound can be set freely and thus adapted to a wide variety of materials. The measured values are...

Open the catalog to page 8
TEST INSTRUMENTS FOR INDUSTRY, TRADE AND RESEARCH - 9

THICKNESS MEASURMENT COATING THICKNESS GAUGE PCE-CT 100 TECHNICAL SPECIFICATIONS Non-destructive, precise measurements on ferrous (Fe) & non-ferrous (nFe) metal substrates This coating thickness gauge PCE-CT 100 uses the magnetic induction (ISO 2178) and eddy current (ISO 2360) measurement methods. These methods are used for non-destructive material testing. The meter measures the thickness of magnetically neutral layers on magnetic or non-magnetic substrate materials. ► high resolution ► ompact and easy to use c ► or ferrous and non-ferrous metals f ► ata transfer via USB d ►...

Open the catalog to page 9
TEST INSTRUMENTS FOR INDUSTRY, TRADE AND RESEARCH - 10

MATERIAL THICKNESS METER PCE-TG 50 TECHNICAL SPECIFICATIONS Ultrasonic material thickness meter with a measurement range of 1.0 ... 200 mm The thickness meter PCE-TG 50 is a compact meter used to measure the thickness of metal, glass, plastic and homogeneous plastics. This material thickness gauge uses an external ultrasonic probe which sends ultrasonic waves into the material to be tested. Since different materials conduct ultrasound at different velocities, various ultrasound velocities can be selected in the material thickness meter. With the thickness gauge, you can determine the...

Open the catalog to page 10
TEST INSTRUMENTS FOR INDUSTRY, TRADE AND RESEARCH - 11

FORCE GAUGE PCE-DFG N 500 TECHNICAL SPECIFICATIONS Digital force gauge for tensile and compressive force measurement up to 500 N The PCE-DFG N 500 is a digital force gauge for tensile and compressive force measurement up to 500 N. It has a resolution of 0.1 N. The measured values are shown on a large display with backlight which is rotatable by 180 °. Therefore, reading the measured values correctly is possible in any position and at any time. The outstanding accuracy of ±0.1 % f. s. is confirmed by the factory calibration certificate that comes with the meter. In addition to the internal...

Open the catalog to page 11

All PCE Instruments catalogs and technical brochures

  1. Flow Meter

    9 Pages

  2. Damp Meter

    9 Pages

  3. Colorimeter

    4 Pages

  4. Anemometer

    8 Pages

  5. Airflow Meter

    10 Pages

  6. PCE-PA 8300

    81 Pages

  7. PCE-830-1

    65 Pages

  8. Viscometers

    4 Pages

  9. Microscopes

    2 Pages

  10. Borescopes

    3 Pages