MOISTURE ANALYSERS LABORATORY INSTRUMENTS MADE IN GERMANY ULTRA X DISCOVER OUR MOISTURE ANALYSERS

LABORATORY INSTRUMENTS MOISTURE ANALYSERS MANUFACTURER OF ULTRA X MOISTURE ANALYSERS Made in Germany A & P Instruments is a recently formed company emerging from ULTRA X laboratory devices, a traditional family-run business. Besides standard moisture analysers, A & P Instruments’ main focus is the production and distribution of instruments for special applications. Here, ULTRA X’s years of experience are put to good use. In December 2002, the move to a new building and thus to modern, well-equipped facilities, enabled the company to take another step forward. The efficient organisational structure...

MOISTURE MEASUREMENT MOISTURE ANALYSER TECHNICAL SPECIFICATIONS For light and bulky materials / weighing range 400 g Our Moisture Meter has been specially developed for light and bulky materials. It has an exceptionally large drying pan and is suitable for applications in the fields of raw material extraction, production, processing, research and recycling. With a maximum weighing capacity of 400 g, a volume of 360 cm³ and a high measuring resolution of 0.01 %, the Moisture Meter enables for all Temperature-insensitive materials up to 360 °C brass chips, steel chips, titanium chips ceramic heater...

MOISTURE MEASUREMENT MOISTURE ANALYSER TECHNICAL SPECIFICATIONS For plaster and gypsum analysis / weighing range 220 g Our Moisture Analyser is a high-precision device that has been specially developed for plaster / gysum analysis. With a maximum weighing capacity of 220 g and a measuring resolution of 0.01 %, it enables exact and reliable moisture measurements. The balance works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass. The Moisture Meter has two adjustable heating temperature...

ULTRA X 3011HQ TECHNICAL SPECIFICATIONS Up to max. 95 cm3 sample volume / weighing range 200 g / high temperature, 105 °C - 600 °C Our Moisture Analyser is a precise device for determining moisture in liquid and solid materials. It is suitable for various applications in raw material extraction, production, processing, research and recycling. With a maximum sample weight of 220 g and a high measuring resolution of 0.01 % the Moisture Balances enables precise moisture measurement. The balance works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously...

TECHNICAL SPECIFICATIONS Rapid incinerator for individual samples up to 600 °C / typical ashing between 8 and 15 minutes. This infrared rapid incinerator is used particularly in conjunction with ULTRA X laboratory devices to determine the incineration residue in sewage sludge after the determination of dry matter. The UX 052 is useful in every laboratory where a fast incineration of single samples of organic materials is eeded. Rapid incinerator for individual samples up to 600 °C, an inexpensive alternative to the high-temperature furnace, for incinerating all materials and determining the ash...

COMPANY LOCATIONS WORLDWIDE CONTACT A & P Instruments GmbH Im Langel 26 59872 Meschede Germany +49 (0) 5232 97780 [email protected] www.apinstruments.net Germany Germany Germany Germany Spain USA UK France Italy Turkey Netherlands Poland Denmark India Bulgaria Romania Morocco PCE Deutschland GmbH DriveTest GmbH A & P Instruments GmbH List-Magnetik GmbH PCE Iberica S.L. PCE Americas Inc. PCE Instruments UK Ltd. PCE Instruments France EURL PCE Italia s.r.l. PCE Teknik Cihazlar Ltd. Şti. PCE Instruments Benelux B.V. PCE Instruments Polska Sp. z. o. o. PCE Instruments Denmark ApS PCE Instruments...