®IMI SENSORS A PCB DIVISION

VIBRATION SWITCHES ■ Motors WHAT IS A VIBRATION SWITCH? A vibration switch is a device that (1) recognizes the amplitude of the vibration to which it is exposed and (2) provides some sort of response when this amplitude exceeds a predetermined threshold value. The switch response is typically an electrical contact closure or contact opening. The electrical contact may be either an electromechanical relay or solid-state triac. Vibration switches are primarily used for protecting critical machinery from costly destructive failure by initiating an alarm or shutdown when excessive vibration of the...

ELECTRONIC VIBRATION SWITCH - SERIES 685BPRODUCT HIGHLIGHTS: ■ Offers two set points with individual alert and alarm relays ■ 4-20 mA output signal for vibration monitoring ■ Analog, 100 mV/g output signal for fault diagnostics ■ Utilizes built-in or remote vibration sensor ■ Adjustable time delays for alert or alarm ■ Accepts 4-20 mA calibrator input signal for accurate threshold value set-up ■ Explosion proof models available* Electronic switches require power to operate and utilize an input signal that is provided by an electronic vibration sensor, or accelerometer. This sensor may be built...

PRODUCT HIGHLIGHTS: USB PROGRAMMABLE SETTINGS INCLUDE: ■ Fully USB programmable for consistent results ■ Alarm threshold level & hysteresis ■ Solid state relay for reliable operation ■ Power-on, startup, & operating delays ■ 2-wire operation uses existing mechanical switch wires ■ Eliminates false trips with programmable delays ■ Remote Reset Anywhere"™ for safety and convenience ■ Exclusive MAVT™ sets alarm threshold automatically ■ Hazardous area approvals available* The Smart Vibration Switch is highly versatile, fully user programmable via USB, low cost, and a drop-in replacement for most...

MECHANICAL VIBRATION SWITCH - SERIES 685APRODUCT HIGHLIGHTS: ■ Unique patent pending, spring-loaded, magnetically coupled sensor, requiring no power ■ Offers cost effective protection for less critical situations ■ 2-wire operation uses existing mechanical switch wires ■ Provides better control over trip sensitivity ■ Remote reset models available For machines requiring simplified contact closure protection, 685A series offers a cost-effective approach to vibration protection. They offer the smallest mechanical switch footprint available in either NEMA 4 or explosion proof housings. The three...

3425 Walden Avenue, Depew, NY 14043 USA pcb.com/imi-sensors | © 2022 PCB Piezotronics - all rights reserved. PCB Piezotronics is a wholly-owned subsidiary of Amphenol Corporation. Endevco is an assumed name of PCB Piezotronics of North Carolina, Inc., which is a wholly-owned subsidiary of PCB Piezotronics, Inc. Accumetrics, Inc. and The Modal Shop, Inc. are wholly-owned subsidiaries of PCB Piezotronics, Inc. IMI Sensors and Larson Davis are Divisions of PCB Piezotronics, Inc. Except for any third party marks for which attribution is provided herein, the company names and product names used in...