STEEL ROLLING & ANNEALING ®IMI SENSORS a pcb division pcb.com/imi-sensors | 1 800 959 4464

STEEL ROLLING & ANNEALING Steel mills not only have fans, pumps, compressors, gearboxes and cooling towers but also have machines and processes unique to the steel industry. The machine sizes, designs, operating speeds, cycle times, batch operations and harsh mill environments often command the use of carefully selected sensors and methods for effective equipment monitoring. Iron making and steel making areas often have an abundance of large belt conveyors, critical ultra-low speed machines with limited rotation, critical large electric overhead traveling cranes and large volume turbo blowers...

Cold rolling mills have similar operating and cyclic challenges as hot rolling, but add in large numbers of roll “chock” bearings that are inherently difficult to instrument, run at varying speeds/loads in batch cycles. These “chocks” are removed and reinstalled into the mill with new rolls many times a day, after only minutes of operation at times. Couple this with stringent product quality critical requirements and again, many more extreme monitoring challenges are raised. 4-20 MA OUTPUT SENSOR MODEL 640B01 ■ Available in top or side exit casings, also M12 connector ■ Peak or RMS, acceleration...

3425 Walden Avenue, Depew, NY 14043 USA pcb.com/imi-sensors | © 2024 PCB Piezotronics - all rights reserved. PCB Piezotronics is a wholly-owned subsidiary of Amphenol Corporation. Endevco is an assumed name of PCB Piezotronics of North Carolina, Inc., which is a wholly-owned subsidiary of PCB Piezotronics, Inc. Accumetrics, Inc. and The Modal Shop, Inc. are wholly-owned subsidiaries of PCB Piezotronics, Inc. IMI Sensors and Larson Davis are Divisions of PCB Piezotronics, Inc. Except for any third party marks for which attribution is provided herein, the company names and product names used in...