Dual Output Vibration Sensors Dual Output Vibration Sensors Designed to provide simultaneous monitoring of two data points from one sensor Highlights Choice of: - ICP® accelerometer with temperature output option (TO) n - Vibration transmitter with temperature output option (TO) - Vibration transmitter with raw vibration output option (RV) - Vibration transmitter with raw vibration velocity output option (RVVO) Top and side exit as well as integral polyurethane and armored cable versions available. n Multi-pin connector allows for simple transfer of both output signals. n Ideal for applications where there is a need for multiple simultaneous sensor measurements without monitoring equipment redundancy. n Motor Monitoring and Protection Gearbox Condition Monitoring Pump Predictive Maintenance Dual output sensors offer an affordable solution for applications where simultaneous monitoring of two different data points is required without redundancy in monitoring equipment. The provision of the second set of data gives the vibration analyst additional information to assist in the detection and trending of equipment condition and performance in order prevent unscheduled downtime and/or catastrophic equipment failure.

Dual Output Vibration Sensors ICP® Accelerometer with Temperature Output Option Dual output ICP® accelerometers with a temperature output option simultaneously measure vibration and temperature levels. The temperature output is a 0 to 1.2 VDC output scaled from +36 to +250 °F with a 5.56 mV/°F + 32 °F sensitivity. The temperature sensor, located mid-level in the housing and monitoring internal sensor temperature, draws its power from the vibration electronics and can only be read when ICP® power is being applied to the vibration leads. All models have a three-pin connector to allow for easy transfer...