Ultrasonic Transducers (Probes) - 3 Pages

Add to MyDirectIndustry favorites
Ultrasonic Transducers (Probes)

Catalog excerpts

Ultrasonic Transducers (probes) Based on our long experience with development and construction of ultrasonic transducers (probes), we are able to offer a broad spectrum of ultrasonic probes. We are specialized in short pulse transducers, but also in probes for special purposes. In our projects we have used many special transducers, for non destructive testing, medical or measurement purposes. We have fulfilled many wishes of or customers with such probes. Ultrasonic transducers with short pulse Ultrasonic composite probes High temperature ultrasonic transducers High pressure ultrasonic transducers Ultrasonic transducers for special purposes NEW: Ultrasonic probe with ultra large bandwidth Contact Transducers Transducers designed for use in direct contact with a test piece Standard Transducers Wide range of puls transducers constantly present in the company's offer. There are contact as well as immersion, flat and focusing transducers with normalized diameters and working frequencies. Immersion Transducers Transducers to Measurements in the Air Transducers with sealed intended to measurement of housing, longitudinal wave, distance, working with continuous acoustically matched to fluid wave or burst. impedance. Power Transducers Share Wave Transducers intended to: mainly used to study the physical - Ultrasonic welding of metal characteristics of materials (thin films); - Ultrasonic welding of materials, - compression and homogenisation. -Transducers can be excited by continuous wave, burst or sweep.

 Open the catalog to page 1

High Temperature and High Pressure Transducers contain a delay line made from steel or water-cooled ceramic, used to testing of acoustic parameters of substances under high pressure. Special Application Transducers many custom transducers for research, medical and industrial applications were developed. Multielement Probes Phased array application-specific probes have a range from 0.5 MHz to 5 MHz and Most of our transducers are constructed so to be excited with an impulse voltage. Typical pulse generated by our flat transducer: and electrical characteristics of the transducer:

 Open the catalog to page 2

transducer 10MHz 300 250 200 150 impedance [Ohm] phase [deg] Technical data of typical Transducers: Range of available Frequencies: Minimal length of a pulse Minimal Diameter: Maximal Diameter: 0.5 – 25MHz 20ns 1mm Limited by the available ceramics Minimum thickness of processing element: Operating Temperature Range: Maximal supply Voltage by puls or burst mode: Impedance: 1,3mm, standard value: 2mm Dependent on the applied ceramics Tolerance of the pulse shape: 700V The impedance module is around 20 Ohm for 10 MHz Assuming the same ceramics, differences between different transducers are...

 Open the catalog to page 3

All PBP Optel sp. z o.o. catalogs and technical brochures

  1. OPCARD 2.0

    2 Pages

  2. OPGUD

    6 Pages

  3. OPLabBox

    1 Pages

  4. OPGS

    1 Pages


    1 Pages

  6. OPGEN1000

    1 Pages


    3 Pages

  8. OPCAV

    1 Pages

  9. Catalog

    55 Pages

  10. Multiplexer

    30 Pages

  11. UG-500

    6 Pages

  12. OPGUD HV

    6 Pages

  13. OPBOX 2.0

    2 Pages