1. Catalogs
  2. PBP Optel sp. z o.o.
  3. OPCAV ULTRASONIC CAVITATION METER

OPCAV ULTRASONIC CAVITATION METER

OPCAV ULTRASONIC CAVITATION METER

Product catalog summary
Overview
OPCAV is a portable ultrasonic cavitation meter designed for measuring cavitation levels in ultrasound washers and sonication signal levels. It is equipped with a measuring probe and is battery-powered, making it ideal for field applications.
Features
  • Portable and battery-powered with a measuring probe included.
  • Measures the intensity of acoustic emissions from cavitation implosions.
  • Simultaneous measurement of cavitation (HF) and sonication (LF) signals.
  • Digital gain control for both channels.
  • USB interface for reading measurement results.
  • Calibration data stored in non-volatile memory.
  • Display shows results for both channels simultaneously.
  • Rechargeable via USB connector with a 3.7V Li-ion battery.
Technical Data
  • HF frequency range: 400kHz - 1200kHz.
  • LF frequency range: 20kHz - 50kHz.
  • Input voltage range: 1mV - 300mV.
  • ADC resolution: 12-bit.
  • Measuring probe impedance: 1kΩ-3kΩ.
  • Measurement representation: By percent, 1% resolution.
  • Gain range: 23dB-61dB.
  • Dimensions: 147x88x26mm.
  • Weight: 193g.
  • Operating time: Minimum 20 hours.
  • Power supply: 5V, max. 420mA, via USB.
See more

Catalog excerpts

OPCAV ULTRASONIC CAVITATION METER-1

OPCAV is a portable ultrasonic cavitation meter. Along with the measuring probe creates the ideal tool for the following applications: • Cavitation level measurement in ultrasound washers (400kHz-1.2MHz); • Sonication signal level measurement (20-50kHz) • Portable cavitation meter, battery powered, measuring probe included; • Measuring method: measuring of the intensity of the acoustic emission arising as a result of the cavitation implosion; • Simultaneous measurement of two channels - cavitation signal (HF) and the sonication signal (LF); • Digital gain control of both of the channels; • The ability to read the measurement results via a USB interface (UART); • Calibration data download to non-volatile memory; • Display 2x12 characters - two channels results are displayed at once; • Charging battery by USB connector (USB cabel 2.0 A-B type); • 3.7V rechargeable Li-ion battery; Range of HF frequency Range of LF frequency Input Voltage range ADC resolution Measuring probe impedance Measurement representation Gain range Dimenstions Weight Operating time Power supply Przedsi^biorstwo Badawczo-Produkcyjne OPTEL Sp. z o.o. ul. Morelowskiego 30 PL-52-429 Wroclaw phone: +48 71 329 68 53 fax.: +48 71 329 68 52 e-mail: [email protected], http://www.optel.eu

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.