OPCARD 3.0PCI-express Ultrasonic Cardwith Integrated Pulser and Receiver www.optel.eu OPCARD 3.0 is a complete ultrasonic testing device, suitable for all type of ultrasonic measurements including: flaw detection, nondestructive testing, TOFD measurements, ranging and sizing applications, material properties characterization and many others. Opcard can be used as master device to control various external devices like multiplexers, scanners, encoders, spray-guns and others in advanced measurement setups in labs or on production lines. Device offer up to 125MHz sampling rate with 12-bit resolution, have massive onboard storage (256MB DDR) and high data throughput to PC using PCIe Gen2 link. Settings sequence capability and advanced triggering modes help achieve high PRF and excellent performance of measurements in real-time. Technical Data Ultra low-noise Pre-amplifier: Input impedance: Input Range: Variable Gain Amplifier range: Input Attenuator: Post-Amplifier: Full Bandwidth: High-pass Filters (-3dB): • Single (PE) or dual (TT) probe operation • Low noise, wide bandwidth amplifier • High gain range (up to +90 dB) • Switchable analog filters (16 settings) • Advanced trigger capabilities • Up to 256MB FIFO storage for acquisitions • Real-time advanced Peak Detectors • Up to 1024 setting sets onboard storage • Flexible Sequence configuration • Automatic settings change in Sequence • Advanced gain modes functionalities • Support fast TGC (time gain correction) • PCI-e interface with 500MB/s throughput • Compact PCIe card format • BNC or Lemo input/probe connectors • I/O connector with TTL and power lines • Expansion connector for extra functions • Support for 2 incremental encoders • Self-diagnostics for high reliability • Low-power, no-fan operation Analog parameters: single-ended to differential output, voltage noise <1 nV/V(Hz) Pulse Voltage: Charging Time:Fall Time: Output impedance: Off (0V) to 360V (positive pulse, short-circuit step pulser) PrzedsiQbiorstwo Badawczo-Produkcyjne OPTEL Sp. z o.o. ul. Jerzego Kowalskiego 5 PL-52-428 Wroclaw phone: +48 71 329 68 53 fax.: +48 71 329 68 52 e-mail: [email protected]

Inputs / Outputs Trigger: Trigger source: Trigger monitor: software, PRF timers, external inputs, encoder position. single or burst mode up to 20kHz with onboard pulser, up to 100kHz with external pulser (i.e. multiplexer). 2 modules, 24-bit, 10us to 16s period, 1us step. trigger counter, overrun counter, etc. Other features: programmable trigger Hold-off, programmable external trigger divider, time-stamp capture, real PRF timer. Acquisition A/D resolution: A/D input range: Sampling freq.: (MHz) Sample format: Sampling Depth: Delay Time: 16-bit, U2/Q15 1 to 65536 (64k) samples, step of 4 0 to...