OPBOX ver 1.2 USB 2.0 Ultrasonic Box with Integrated Pulser and Receiver http://www.optel.eu OPBOX ver 1.2 is a complete ultrasonic testing device, suitable for all ultrasonic measurements and due to many additional digital inputs/outputs and internal processor it can be used as a controller for more complicated devices. The box can work together with following devices: multi channel multiplexer Phased array systems Scanner - it has input for incremental encoders; The box has an implemented one channel pulser & receiver and can be used with one transducer or with two (one is sending, and the second one receiving). Features - Low noise preamplifier - Switchable analog filters - Support fast TGC (time gain compensation) - 2 signal inputs PE and TT - Input attenuator (-24dB) - Input Impedance 50 Ohm, 10pF - 100MHz sampling frequency - Delay settings up to 255us - Various triggering mode - Interfaces USB 2.0 HiSpeed - Dimensions: 164mm x 138mm x 34 mm - BNC or Lemo analog connectors - DB15 connector for I/O lines Power supply: 9V DC/2A Przedsiębiorstwo Badawczo-Produkcyjne OPTEL Sp. z o.o. ul. Morelowskiego 30 PL-52-429 Wrocław phone: +48 71 329 68 53 fax.: +48 71 329 68 52 e-mail: [email protected] http://w

Technical Data - cont Pulser: Pulse Voltage off(0V) to 360V (positive pulse) Charging Time regulated from 0 to 3.1us in 0.1us steps Fall Time <= 20 ns Pulse Duration Short circuit, bandwidth up to about 50MHz Output impedance < 1 Ohm A/D data acquisition: Resolution 8 bit Sampling 100; 50;25;12,5, Frequency(MHz) Data Buffer 512, 1k, 2k,4k,8k,16k, 32k, 64k, 128kB Delay Time Post trigger from 0 to 255us DAC (TGC) with arbitrary waveform generator: Frequency: 100MHz Resolution: 8 bit Max. gain changing: 48dB pro step Trigger: Application trigger rate Software controlled; External trigger 2x inputs,...