SERIES O.D. Features FL - Standard Inch Series NOTE: Available ONLY on the ΓFL, FM, FJ series FM - ISO Metric Series No Entry - Standard Straight O.D. bearing FMT - Compact ISO Metric Thin Wall Series A - Crowned ԓself-aligning O.D. bearing (closed only) FG - ԓFAGٔ Thin Wall Interchange FJ - JIS Standard Series I.D. Features PS - Inch Series Sleeve Bearings NOTE: Does NOT apply to PS, PSF, PSM, PSFMӔ PSF - Inch Series Flange Bearings No Entry - Standard Precision running clearance on the I.D. PSM - ISO Metric Series Sleeve Bearings C - Compensated running clearance on the I.D. PSFM - ISO Metric...

Closed or Open Style > Plane Ordering Information NOTE: Available ONLY on ΓP, PW, PM series NOTE: Standard Simplicity bearings are installed in housings No Entry - Standard Closed Series SERIES N - Open Series P - Standard Inch Series Pillow Blocks (FL) PW - Inch Series Twin Pillow Blocks (FL) PM - ISO Metric Pillow Blocks (FM) Housing I.D. Features SDS - Single Steel Flange Mount Die Set Series (FL) No Entry - Standard Spherical ԓself-aligning I.D. in the housing.(Uses standard straight O.D. bearings) DDS - Double Steel Flange Mount Die Set Series (FL) SFP - Inch Series Single Aluminum Flange...

Simplicity > Self-lubricating Bearings > Notes Page Linear Motion Systems Notes The data and specifi cations in this publication have been carefully compiled and are believed to be accurate and correct. However, it is the responsibility of the user to determine and ensure the suitability of Pacifi c Bearingή products for a specifi c application. Pacifi c Bearings only obligation will be to repair or replace without charge, any defective components if returned promptly. No liability is assumed beyond such replacement. *Consult www.pacifi c-bearing.com for the latest technical updates. 800.962.8979...

FRELON ή BEARING SURFACEhas Angled Slot Plug material is 316 stainless steel. BEARING MATERIAL: FrelonJ > is standard for stainless square steel shafting (APN16 - E). FrelonGold > ή is also available for applications to be run on steel. Bearing plugs can be purchased separately Օ Ideal for use in many applications as a wear pad Bearing surface area = .300 in > FRELON ծ BEARING SURFACE(Approx. .025 thick) 2 3/4 - 20CLASS #2 THREAD .090.332.090 MAX Static Load Capacity per Plug = 450 lbs. Օ The use of green Loctite is recommended to hold the adjustable bearing plugs in position > Runs on a single,...

High load capacity Օ High strength Low wear rate vs. other materials > Technical Information Ε Self-lubricating (runs without added lubricant) Embeddability of hard particulate Օ Wide temperature range (-400F/+400аF) (-240C/+240аC) Chemically inert Օ Vibration dampening (NO metal-to-metal contact) > FrelonGOLD > TEFLON FEATURES: and FrelonJ > ή are a compound of Tefl on > and fi llers developed for improved performance over other bearings. They provide low wear, low friction, self-lubrication, and high strength. > Teflon Fillers FrelonGOLDFrelonJ Anodized AluminumBodyBonding AgentFrelon Ε The...

Simplicity bearings are available with three liner materials. FrelonGOLD Frelon J is a yellow colored material specially formulated to provide the optimum performance with 300 series stainless steel and softer shafting like bare aluminum. is a dark gold colored high performance material with gold-colored fi llers and is compatible with standard RC60 hardened steel shafting, RC70 ceramic coated Feather ShaftingΙ and 440 stainless steel shafting. > Bearing Plug Shown - See Page 33. CAUTION: Performs like a standard ball bearing Օ Additional clearance built into the I.D. (all other dimensions are...

Technical Information Standard Anodize MATERIALS:Aluminum Alloy Ζ Is a heat treated and artifi cially aged aluminum with good strength and corrosion resistance. > .0002" thick 316 Stainless Steel Has an excellent corrosion resistance and is widely used by the paper, food, and other industries. FINISHES: Standard Anodized ֖ A sulfuric bath anodizing with a nickel acetate seal that will stand up to 14 days exposure in a 5% salt spray solution at 96F. It is applied at a .0002" thickness. NOTE: See page 62 for details on chemical resistance. TOLERANCES: Е All bearings are precision ground both I.D....

Ε Made of aluminum alloy Pillow blocks are interchangeable with industry standard ball bearing pillow blocksՕ Critical centerline dimensions hold accuracy within .001" on inch sizes and ѱ.015 mm on metric sizes FINISHES: Clear anodized fi nish (Standard) > Technical Information Standard pillow blocks have built-in self-alignment in all directions. Օ Standard pillow blocks have 1/2 misalignmentfrom centerline. Е This feature is built into the housing with a patented spherical radius at the midpoint of the block. This self-aligning capability will allow for some shaft defl ection and misalignment....

Technical Information SEALS: Use only in the most contaminated environments. Polymod > ή (standard) A high performance polymer modifi ed material that reduces friction of a standard buna material by 50% and increases wear life > ֮ Temperature Polymod is a registered trademark of Polymod Technologies, Inc. -40 ֖ +400F Urethane (special - designate with ГU) Ԗ A moly-impregnated urethane scraper that is only for the severest applications - friction is greatly increased! Temperature -40 ֖ +180 F VitonЙ (special - designate with VӔ) Used only in high temperature applications up to 400ְF (up to 204C)....

FRELONTRANSFER PROCESS The interaction of the Frelon > CAUTION: Do not repeatedly clean the shafting with alcohol! This will remove the previously transferred material entirely and increase the wear to the bearing liner. material and the shafting creates a natural, microscopic transfer of the Frelon to the running surface. A thin fi lm is deposited on the shaft, and the valleys in the surface fi nish are fi lled in with Frelon material during the initial break-in period. This transfer creates the self-lubricating condition of Frelon riding on Frelon. This break-in period will vary depending on...