*mydirectindustry

MTF 55-S

Product catalog summary

Specifications:
1. Moment arms should be measured from the centerline of the extrusion.
2. Limit switches are necessary to prevent damage from carriage contact with actuator end blocks.
3. A recommended 25 mm of over-travel is added to the body length in each direction, with a minimum of 10 mm for special applications.

Features & Benefits:
- High Load Capacity with a ball-guided rail system.
- Low Friction, Noise & Vibration.
- Ideal for Vertical Movement.
- Adjustable belt tension and steel-reinforced belt for high loads.
- Anodized aluminum housing and carriage.
- Motor mount assembly and T-slots for easy mounting.

Technical Data:
- Size: 55 x 55 mm (2.17 x 2.17 in)
- Max Speed: 1 m/s (39 in/s)
- Stroke Length: Max 1000 mm (39 in), Min 100 mm (3.94 in)
- Pulley Drive Ratio: 130 mm (5.12 in)
- Max RPM: 460
- Base Weight: 5.1 Kg (11.2 lbf)
- Max Load: Fx 800 N (180 lbf), Fy 7800 N (1753 lbf), Fz 7800 N (1753 lbf)
- Max Moments: Mx 265 Nm (2345 lbf-in), My 480 Nm (4248 lbf-in), Mz 480 Nm (4248 lbf-in)
- Moment of Inertia: Ix 36 cm4 (0.86 in4), Iy 46 cm4 (1.10 in4)
- Max Radial Load on Input Shaft: 200 N (45 lbf)
- No Load Torque: 1.2 Nm (10.6 lbf-in)

Ordering Information:
- Series: MTF Belt Driven Unit
- Size: 55 mm x 55 mm
- System Type: Driven or Undriven
- Body Length: Up to 1000 mm with 50 mm over-travel
- Shaft Diameter: Options include 14 mm
- Shaft Type: Female Hollow, Left Male, Right Male, Both Male
- Guidance Type: Profile rail with 2 runner blocks per carriage

Accessories:
- Mid Section Mounting Bracket
- End Cap Mounting Bracket
- Motor Mounts/Coupling Housings
- Coupling Flange Plate Stub Shafting

Additional Information:
Product information and 2D/3D CAD drawings are available at www.pbclinear.com. For technical and application information, contact 1-888-962-8979. Specifications are subject to change without notice.

Catalog excerpts

LINEAR ACTUATOR TECHNOLOGY MT Series MTF Belt Driven Linear Actuator The MTF belt driven unit with dual rail system has the durability to handle high load capacity. An ideal fit for vertical applications. Vertical Lift Strong Carriage TECHNICAL DATA Pulley Drive Ratio • Ideal for Vertical Movement • Low Friction, Noise & Vibration • High Load Capacity - (2) ball guided rail system features & benefits Number of Pulley Teeth (1) Adjustable belt tension Base Weight (2) Steel reinforced belt capable of handling high loads (3) Anodized aluminum housing and carriage (4) Ball guided rail system (5) Motor mount assembly (6) T-slots - ease of mounting 2 1 1. Moment arms for calculating moments should be measured from the centerline of the extrusion. 2. Limit switches must be used in order to prevent the carriage from contacting the actuator end blocks, resulting in damage. 3. 25 mm of over-travel has been added to the body length in each direction to allow for carriage over-travel. 25 mm is the recommended over-travel; although a minimum of 10mm may be specified for special applications. Iy Max. Radial Load on Input Shaft No Load Torque For combined loads, the combined loading cannot exceed the following formula.

Open the catalog to page 1

DIMENSIONAL INFORMATION OVERTRAVEL ZONE Qeep OVERTRAVEL ZONE BODY LENGTH = STROKE + CARRIAGE LENGTH + (2 x OVERTRAVEL) ACCESSORIES (Available upon request.) Mounting Bracket Mounting Bracket Motor Mounts/ Coupling Housings Flange Plate Stub Shafting ORDERING INFORMATION 'No belt or motor mount, contact manufacturer for "AT version. "Contact manufacturer for other options and availability. Product information and 2D/3D CAD drawings available for download at www.pbclinear.com VKfij For technical & application information call 1-888-962-8979 m The data and specifications in this publication have...

Open the catalog to page 2

MTF 55-S

MTF 55-S

Catalog excerpts

All PBC Linear catalogs and technical brochures

Archived catalogs