LINEAR ACTUATOR TECHNOLOGY MT Series MTE Belt Driven Linear Actuator Vertical Lift Light Carriage TECHNICAL DATA features & benefits • Ideal for Vertical Applications Pulley Drive Ratio • Low Friction, Noise & Vibration • Long Travel Length • High Acceleration, Speed & Rigidity Number of Pulley Teeth (1) Adjustable belt tension Base Weight (2) Anodized aluminum housing and carriage (3) Steel reinforced belt capable of handling high loads (4) Ball guided rail system (5) Motor mount assembly Max. Radial Load on Input Shaft No Load Torque 4 NOTE: 1. Moment arms for calculating moments should be measured from the centerline of the extrusion. 2. Limit switches must be used in order to prevent the carriage from contacting the actuator end blocks, resulting in damage. 3. 25mm of over-travel has been added to the body length in each direction to allow for carriage over-travel. 25 mm is the recommended over-travel; although a minimum of 10mm may be specified for special applications. For combined loads, the combined loading cannot exceed the following formula.

DIMENSIONAL INFORMATION OVERTRAVEL ZONE OVERTRAVEL ZONE - BODY LENGTH = STROKE + CARRIAGE LENGTH + (2 x OVERTRAVEL) — OVERALL LENGTH = BODY LENGTH + DRIVE END LENGTH + IDLER END LENGTH - ACCESSORIES (Available upon request.) Mounting Bracket Mounting Bracket Motor Mounts/ Coupling Housings Flange Plate Stub Shafting ORDERING INFORMATION 'No belt or motor mount, contact manufacturer tor "N" version. "Contact manufacturer for other options and availability. Product information and 2D/3D CAD drawings available for download at www.pbclinear.com VKfij For technical & application information call 1-888-962-8979...