Catalogs >
PBC Linear >
MTC 42

MTC 42
2Pages

Catalog excerpts

LINEAR ACTUATOR TECHNOLOGY MT Series MTC 42 Belt Driven Linear Actuator The MTC belt driven unit features a flat profile design for compact spaces. Integrated with the carriage is a stainless steel strip with magnetic seals. Ideal in high contamination and clean room environments. Same direction of movement for all carriages TECHNICAL DATA features & benefits • High Acceleration, Speed & Rigidity • Long Travel Length • Low Friction, Noise & Vibration • Strong yet Lightweight & Corrosion Resistant Pulley Drive Ratio Number of Pulley Teeth (1) Anodized aluminum housing and carriage Base Weight (2) Steel reinforced belt capable of handling high loads (4) Adjustable belt tension (3) Ball guided rail system (5) T-slots for mounting and sensor mounting (6) Multiple drive configurations 1. Moment arms for calculating moments should be measured from the centerline of the extrusion. 2. Limit switches must be used in order to prevent the carriage from contacting the actuator end blocks, resulting in damage. 3. 25mm of over-travel has been added to the body length in each direction to allow for carriage over-travel. 25 mm is the recommended over-travel; although a minimum of 10mm may be specified for special applications. Max. Radial Load on Input Shaft No Load Torque For combined loads, the combined loading cannot exceed the following formula.

Open the catalog to page 1

DIMENSIONAL INFORMATION OVERALL LENGTH = BODY LENGTH + DRIVE END LENGTH + IDLER END LENGTH BODY LENGTH = STROKE + CARRIAGE LENGTH + (2 x OVERTRAVEL) SHAFT VERSIONS ACCESSORIES (Available upon request.) Mounting Bracket Mounting Bracket Motor Mounts/ Coupling Housings Flange Plate Stub Shafting ORDERING INFORMATION Product information and 2D/3D CAD drawings available for download at www.pbclinear.com VKfij For technical & application information call 1-888-962-8979 m The data and specifications in this publication have been carefully compiled and are believed to be accurate and correct....

Open the catalog to page 2