LINEAR ACTUATOR TECHNOLOGY MT Series MTB 42 Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features & benefits • High Acceleration, Speed & Rigidity Size mm 42 x 42 • Long Travel Length Max. Speed m/s 5 in/s 196.85 • Low Friction, Noise & Vibration Max. Stroke Length mm 2,000 in 78.74 • Strong yet Lightweight & Corrosion Resistant Min. Stroke Length mm 100 in 3.94 • Multiple Accessories & Options Pulley Drive Ratio mm 90 in 3.54 Number of Pulley Teeth 0.784 lb 1.73 Kg .291 lb 0.64 Fx N 460 lbf 103 Max. Load 5 Fy 6– Multiple drive configurations 3 2 6 1. Moment arms for calculating moments should be measured from the centerline of the extrusion. 2. Limit switches must be used in order to prevent the carriage from contacting the actuator end blocks, resulting in damage. 3. 25 mm of over-travel has been added to the body length in each direction to allow for carriage over-travel. 25 mm is the recommended over-travel; although a minimum of 10 mm may be specified for special applications. Moment of Inertia lbf 351 1,560 lbf 351 Mx Nm 20 lbf-in 177 Nm 55 lbf-in 487 Mz 4 1,560 N My Max. Moments N Fz 1 5– T-slots for mounting and sensor mounting NOTE: Kg Add for 100 mm or 3.94 in of Stroke 2– Steel reinforced belt capable of handling high loads 4– Adjustable belt tension 3,500 Base Weight 1– Anodized aluminum housing and carriage 3– Ball guided rail system 18 Max RPM Key Features in 1.65 x 1.65 Nm 55 lbf-in 487 Ix 4 Iy Max. Radial Load on Input Shaft No Load Torque cm cm 4 12 15 in 4 0.29 in 4 0.36 N 220 lbf 49.5 Nm 0.8 lbf-in 7.1 For combined loads, the combined loading cannot exceed the following formula.

DIMENSIONAL INFORMATION BODY LENGTH = STROKE + CARRIAGE LENGTH + (2 x OVERTRAVEL) SHAFT VERSIONS ACCESSORIES (Available upon request.) Mounting Bracket Mounting Bracket Motor Mounts/ Coupling Housings Flange Plate Stub Shafting ORDERING INFORMATION Body Length* Must include For lengths greater than 1,500 mm consult factory No belt or motor mount, contact manufacturer for "N" version. ' Contact manufacturer for other options and availability. Profile rail will be segmented for lengths over 1 m. Common Drive Combinations Product information and 2D/3D CAD drawings available for download at www.pbclinear.com...

LINEAR ACTUATOR TECHNOLOGY MT Series MTB 55 Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features & benefits • High Acceleration, Speed & Rigidity Size mm 55 x 55 in 2.17 x 2.17 • Long Travel Length Max. Speed m/s 5 in/s 196.85 • Low Friction, Noise & Vibration Max. Stroke Length mm 6,000 in 236.22 • Strong yet Lightweight & Corrosion Resistant Min. Stroke Length mm 100 in 3.94 • Multiple Accessories & Options Pulley Drive Ratio mm 120 in 4.72 Number of Pulley Teeth Max RPM Key Features...

DIMENSIONAL INFORMATION 190 150 2X 55 3X M5 5 mm 2X 88 2X 20 166 OVERALL LENGTH = BODY LENGTH + DRIVE END LENGTH + IDLER END LENGTH = BODY LENGTH + 88 + 88 25 mm OVERTRAVEL ZONE 25 mm OVERTRAVEL ZONE A BODY LENGTH = STROKE + CARRIAGE LENGTH + (2 x OVERTRAVEL) = STROKE + 150 + ( 2 x 25) DRIVE END IDLER END 8.4 SHAFT VERSIONS FEMALE - Ø 12 - 14 mm MALE - Ø 16 mm DETAIL A 2X Ø 32 H7 7 mm 4.2 6.2 DETAIL B 2 PLCS. C 1.5 mm 2X M5 4.3 B 28 76 25 6.3 5.2 50 5.3 8.6 DETAIL C 4 PLCS. 55 2X 38.5 2X 16.5 4X 8 48.5 2X 23 55 ACCESSORIES (Available upon request.) Mid Section Mounting Bracket End Cap Mounting...

LINEAR ACTUATOR TECHNOLOGY MT Series MTB 80 Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features & benefits • High Acceleration, Speed & Rigidity Size mm 80 x 80 in 3.15 x 3.15 • Long Travel Length Max. Speed m/s 5 in/s 196.85 • Low Friction, Noise & Vibration Max. Stroke Length mm 6,000 in 236.22 • Strong yet Lightweight & Corrosion Resistant Min. Stroke Length mm 100 in 3.94 • Multiple Accessories & Options Pulley Drive Ratio mm 160 in 6.30 Number of Pulley Teeth Max RPM Key Features...

DIMENSIONAL INFORMATION 266 230 2X 75 5X M5 10 mm 2X 104 40 TYP. 222 OVERALL LENGTH = BODY LENGTH + DRIVE END LENGTH + IDLER END LENGTH = BODY LENGTH + 104 + 104 25mm OVERTRAVEL ZONE 25MM OVERTRAVEL ZONE A BODY LENGTH = STROKE + CARRIAGE LENGTH + (2 x OVERTRAVEL) = STROKE +230 + (2 x 25) IDLER END DRIVE END 11 B 40 SHAFT VERSIONS FEMALE - Ø 16 - 19 mm MALE - Ø 19 mm DETAIL A 2X Ø 55 H7 7 11.2 72 6.5 6 DETAIL B 2 PLCS. C 2.5 mm 103.6 8.2 8.5 13.2 DETAIL C 2 PLCS. 80 2X 58 41 2X 22 54 2X 40 4X 8 80 ACCESSORIES (Available upon request.) Mid Section Mounting Bracket End Cap Mounting Bracket Motor...