™ miniature slide motion system - screw driven An economical alternative to conventional miniature linear guides. • Self-lubricating design - no sealing, no particulates, and tolerates high temperature extremes • Corrosion-resistant • Industry standard interchangeable • Lengths up to 640 mm • Eight (8) leads available • Optional hand brake MS Series MS Series • Robust design - reliable • High torque stepper motor (NEMA 17) • Preloaded drive nut LS Series LS Series • Right hand rolled thread • 303 stainless steel screw with TFE coating • Self-lubricating polyacetal, anti-backlash nut SAVE TIME & MONEY Size 17 stepper motor with 6 mm (0.236") screw 100 .00019 (1 mm Lead) 350 70 60 .00039 (2 mm Lead) 50 40 .00078 (4 mm Lead) 250 200 150 30 .00098 (5 mm Lead) 100 50 .00197 (10 mm Lead) 0 Applications • Medical equipment • Medical-precision • Electronics 300 RECOMMENDED LOAD LIMIT 20 10 0 • Automation • Packaging • Printing 400 LEAD 200 400 0 600 800 1000 1200 1400 1600 1800 SPEED (full steps/sec.) lEAD cODE LINEAR TRAVEL PER STEP mm Inch 1 mm AH 0.005 0.000197 2 mm AG 0.010 0.000394 4 mm AR 0.020 0.000787 5 mm AX 0.025 0.000984 6 mm BG 0.030 0.001181 8 mm BH 0.040 0.001575 10 mm AJ 0.050 0.001969 12 mm BD 0.060 0.002362 Note: 1.8° = 200 steps per revolution Contact an application engineer to customize your LS/ms gantry system! PBC Linear, a Pacific Bearing Company • 6402 East Rockton Road, Roscoe, IL 61073 USA • 1-800-962-8979 • www.pbclinear.com THRUST(N) THRUST (lbs.) 90 80

DIMENSIONAL DATA MS SERIES 60 TYP 20 TYP STANDARD CARRIAGE & RAIL DIMENSIONS 62 38 51 F H1 S 38 MR15: MOUNTING HOLES FOR M3 SCREWS MR20: MOUNTING HOLES FOR M5 SCREWS 34 42.2 C MR15: M3 x 0.5 TAPPED HOLES MR20: M4 x 0.7 TAPPED HOLES G 160 6.4 10 E T H 42.2 D LS SERIES 60 TYP 20 TYP 62 H2 B1 38 [Maximum Length 640mm] 38 MR15: MOUNTING HOLES FOR M3 SCREWS MR20: MOUNTING HOLES FOR M5 SCREWS NOTE: The “S” dimension will remain MR15: M3 x 0.5 TAPPED HOLES MR20: M4 x 0.7 TAPPED HOLES K 160 46.0 M 6.4 10 constant at one end unless requested otherwise. B 24.8 A Standard and cut-to-length rail ends are...