DS1050 Net2Air Bridge - Ethernet, PoE, Plastic Housing

1 / 2 PagesView full catalog

DS1050 Net2Air Bridge - Ethernet, PoE, Plastic Housing

Product catalog summary

System Specifications

Electrical: The system operates at a voltage of 2.4GHz (802.15.4) and supports IEEE 802.3af (15.4W) for Power over Ethernet (PoE). It requires a CAT5 cable type and is UL 60950-1 Rated.
Operating Temperature: The device functions within a temperature range of -20°C to +55°C (+4°F to +131°F).
Moisture and Vandal Resistance: The system is resistant to moisture and vandalism.

Communication

Wireless Devices: It is recommended to use up to 10 wireless devices per Net2Air Bridge for optimal performance.
Wireless Range: The optimum wireless range is 15 meters (50 feet).
DHCP Support: The system supports DHCP, but a fixed IP is recommended.

Net2Air Bridge Features

The Net2Air Bridge uses Paxton Access' Net2Air wireless technology to facilitate communication between the Net2 software and wireless control units like Paxlock or Net2 nano.
It connects via a site's LAN, allowing multiple Ethernet bridges to be linked back to the PC running the Net2 software.
External use requires protection in a weatherproof housing.

Dimensions

The dimensions of the Net2Air Bridge are 200 mm (7.9 inches) in length and 78 mm (3 inches) in width.

Accessories and Sales Codes

The Net2Air Bridge - Ethernet, PoE, Plastic Housing is identified by the sales code 477-500.

Catalog excerpts

DS1050 Net2Air Bridge - Ethernet, PoE, Plastic Housing-1

Net2Air Bridge - Ethernet, PoE, Plastic Housing System specifications Power over Ethernet (PoE) Cable type Electrical Operating Voltage Wireless frequency DHCP support (fixed IP recommended) Communication Recommended wireless devices per Net2Air Bridge Optimum wireless range Environment Operating Temperature Moisture resistance No - if used externally, it must be protected in a weatherproof housing Vandal Resistance The Net2Air range of bridges uses Paxton Access' Net2Air wireless technology to communicate with the Net2 software. The Net2Air Ethernet bridge provides the wireless communication link between the PC running Net2 software and wireless control units such as the Paxlock or Net2 nano. The Ethernet bridge uses a site's LAN which means that multiple Ethernet bridges can be placed around a site and linked back to the PC

Open the catalog to page 1