Easyprox nano System specifcations Maximum total users/tokens 10,000 (Card pack limit applies) Token compatibility Stored events Handsfree compatible Door open time Silent operation Electrical Battery type Easyprox battery pack - 4 x AA high capacity Battery life Communication TCP/IP Recommended wireless devices per Net2Air Bridge Optimum wireless range Features Door widths supported Door contact Rear handle exit request Flat battery jumpstart terminals Easyprox nano is a Net2 access control unit in a door handle. It combines a wireless access control unit and a reader in one. Net2 is a PC based security system for controlling access through doors. Net2 allows users to be given access to particular areas at certain times. Because the system is networked, all administration can be done from a central point. Environment Operating temperature Moisture resistance Vandal Resistance Easyprox nano is supplied with everything needed to secure one door, including a tubular mortice latch. It communicates with Net2 software at a central point by a secure, low power radio link. Easyprox nano is battery powered which means that the unit is totally wireless as it does not require mains power. Installation is very cost effective and creates minimal disruption as no cable is required to communicate between doors and there is no need to wire into mains. Easyprox nano benefits from unique ease of installation and configuration - no knowledge of networks is required. One Easyprox nano controls a single door. It may be installed alongside other Net2 nano, Net2 plus or Net2 classic control units. As with all Net2 control units, Easyprox nano is designed to work seamlessly in the event of a communications failure. It will continue to permit or deny access to users as appropriate. Once communications are re-established the activity is reported back to th

Accessories and sales codes Easyprox nano Easyprox battery pack - 4 x AA high capacity