Catalogs >
PAXTON >
DS1036 Net2 Classic

DS1036 Net2 Classic
2Pages

Catalog excerpts

Net2 classic System specifcations Maximum total users/tokens Code length Number of time zones Number of access levels Stored events Data retention during a total power loss Handsfree compatible Custom Wiegand Silent operation Door open time Electrical Operating Voltage Current consumption Relay switchable voltage Relay switchable current Alarm output current Communication TCP/IP Hardware Reader ports per ACU 4 - check current draw on individual readers Total ACU reader port output current Reader cable type for extensions Network cable type As with all Net2 control units, Net2 classic is designed to work seamlessly in the event of communications failure. It will continue to permit or deny access to users as appropriate. Once communications are re-established the activity is reported back to the PC. Reader cable type The Net2 classic control units are connected using a dedicated ‘daisy chain’ RS485 network. They communicate with the server PC via a USB or serial communications converter or across a computer network using a Net2 plus control unit or an Ethernet interface. The server PC can be connected at any point along the RS485 data line. 3rd party reader support Net2 classic is a single door access control unit and can be networked to others. Other hardware features: Features Input for exit button Input for door contact Alarm/bell output Environment Operating temperature Moisture resistance No - if used externally, it must be protected in a weatherproof housing Vandal Resistance Volt free control relay Input for PSU fail Input for tamper

Open the catalog to page 1