DS1023 TOUCHLOCK vandal resistant metal keypad

1 / 2 PagesView full catalog

DS1023 TOUCHLOCK vandal resistant metal keypad

Product catalog summary

System Specifications

Electrical: Operating voltage is between 10V - 14V DC with a current consumption of 120mA.
Operating Temperature: The device operates effectively between -20°C and +55°C (-4°F to +131°F).
Cable Specifications: Uses Belden 9540 cable type for extensions with a maximum cable extension length of 150m/500ft in the USA and 100m/328ft elsewhere. The standard cable length is 5m/16ft.
Moisture Resistance: Rated at IPX7, indicating high moisture resistance.
Vandal Resistance: High, with a TOUCHLOCK vandal-resistant metal keypad.

Product Features

The metal keypads provide PIN or Code authentication and are compatible with Switch2 and Net2 systems.
Default LED state is Green; flashes Green for access granted and Red for access denied, with an audible tone in both cases.

Dimensions

Dimensions are 89 mm x 40 mm x 28 mm (3.5” x 1.6” x 1.1”).

Accessories and Sales Codes

TOUCHLOCK vandal-resistant metal keypad, surface mount box, and mounting plate with sales code 521-715.

Catalog excerpts

DS1023 TOUCHLOCK vandal resistant metal keypad-1

TOUCHLOCK vandal resistant metal keypad System specifcations Cable Length Cable type for extensions Maximum Cable extension length 100m/328ft 150m/500ft - USA Backlit Keypad Electrical Operating Voltage Current consumption Environment Operating temperature Moisture resistance Vandal Resistance The vandal resisitant metal keypads are devices that offer the simplicity of PIN or Code authentication for system users. They are available for use with both Switch2 and Net2 systems The reader is wired as shown on the control unit label. By default, all the reader LEDs state is Green. If access is granted, the reader flashes Green. If access is denied, the reader flashes Red.’ An audible tone is emitted in both cases.

Open the catalog to page 1