DS1016 PROXIMITY HID panel mount reader

1 / 2 PagesView full catalog

DS1016 PROXIMITY HID panel mount reader

Product catalog summary

System Specifications

Electrical: Operating voltage is between 10V - 14V DC with a current consumption of 110mA.
Operating Temperature: The device operates effectively between -35°C to +66°C (-31°F to +151°F).
Cable Specifications: Uses Belden 9540 cable type for extensions with a maximum cable extension length of 100m/328ft, and 150m/500ft in the USA.
Compatibility: Compatible with HID and EM tokens and supports handsfree operation.
Moisture and Vandal Resistance: Rated IPX7 for moisture resistance and high vandal resistance.

Product Overview

The Proximity HID Panel Mount Reader (DS1016) is an RFID device designed for contactless authentication. It is compatible with Switch2 and Net2 systems. The reader operates by reading a token held close to it, verifying access permissions, and granting or denying access accordingly. The device features three LEDs that indicate access status: green for granted and red for denied, accompanied by an audible tone.

Dimensions

58 mm x 58 mm (2.3” x 2.3”)
40 mm (1.6”) depth
49 mm (1.6”) width

Accessories and Sales Codes

The product is identified by the sales code 390-135.

Catalog excerpts

DS1016 PROXIMITY HID panel mount reader-1

PROXIMITY HID Panel mount reader System specifcations Cable Length Cable type for extensions Maximum Cable extension length 100m/328ft 150m/500ft - USA Token compatibility Handsfree compatible Electrical Operating Voltage Current consumption Environment Operating temperature Moisture resistance Vandal Resistance The proximity HID panel mount readers are RFID devices that offer the convenience of contactless authentication for system users. They are available for use with both Switch2 and Net2 systems The reader is wired as shown on the control unit label. A token is read by holding it within close proximity of the reader. Once a token has been read the control unit looks up the access permissions of that user. The control unit verifies the information and grants or denies access as appropriate. By default, all 3 LEDs are lit. If access is granted, the green LED flashes. If access is denied, the red LED flashes.’ An audible tone is emitted in both cases.

Open the catalog to page 1