DS1007 PROXIMITY Metal reader

1 / 2 PagesView full catalog

DS1007 PROXIMITY Metal reader

Product catalog summary

System Specifications

Electrical: Operating voltage is between 10V - 14V DC with a current consumption of 110mA.
Operating Temperature: The device operates effectively between -35°C to +66°C (-31°F to +151°F).
Cable Specifications: Uses Belden 9540 cable type for extensions with a maximum cable extension length of 100m/328ft, and 150m/500ft in the USA.
Compatibility: Compatible with handsfree operation and supports Paxton and EM tokens.
Moisture and Vandal Resistance: Rated IPX7 for moisture resistance and high vandal resistance.

Product Description

The PROXIMITY Metal Reader is an RFID device designed for contactless authentication, compatible with Switch2 and Net2 systems. It reads tokens held close to the reader, verifying access permissions through a control unit. The device indicates access status with LED lights and an audible tone.

Dimensions

Dimensions are 27 mm x 76 mm (approximately 1” x 3”).

Accessories and Sales Codes

Available in Satin chrome (390-747) and Chrome (390-727) versions.

Catalog excerpts

PROXIMITY Metal reader System specifcations Cable type for extensions Belden 9540 Maximum Cable extension length 100m/328ft Token compatibility Paxton Versions Satin or bright chrome Vandal Resistance High The proximity metal readers are RFID devices that offer the convenience of contactless authentication for system users. They are available for use with both Switch2 and Net2 systems The reader is wired as shown on the control unit label. A token is read by holding it within close proximity of the reader. Once a token has been read the control unit looks up the access permissions of that user. The control unit verifies the information and grants or denies access as appropriate. By default, all 3 LEDs are lit. If access is granted, the green LED flashes. If access is denied, the red LED flashes.'An audible tone is emitted in both cases.

Open the catalog to page 1