PROXIMITY Reader - KP50/KP75/KP75 screw connector System specifcations Cable Length 5m/16ft (Screw connector - None) Cable type for extensions Maximum Cable extension length 100m/328ft 150m/500ft - USA Token compatibility Additional coloured covers available Yes Handsfree compatible Electrical Operating Voltage Current consumption Environment Operating temperature Moisture resistance Vandal Resistance The KP50/KP75/KP75 Screw connector keypad readers are RFID/ Keypad combinations devices that offer the convenience of contactless authentication, or the added security of PIN/Prox entry, for system users. They are available for use with both Switch2 and Net2 systems The readers are supplied with a choice of black or white covers/ bezels. The reader is wired as shown on the control unit label. The 75 Series variant is also optionally available with a screw connector version making cabling even simpler. Note: Be sure to avoid mounting proximity readers on metal surfaces or near other proximity readers as this will affect the read range. A token is read by holding it within close proximity of the reader. Once a token has been read the control unit looks up the access permissions of that user. The control unit verifies the information and grants or denies access as appropriate. By default, all 3 LEDs are lit. If access is granted, the green LED flashes. If access is denied, the red LED flashes.’ An audible tone is emitted in both cases.

Accessories and sales codes PROXIMITY Keypad - KP75, Screw connector