MCT 1302 ETHERNET IP

Product catalog summary

Overview: The MCT 1302 ETHERNET IP is a versatile touch screen weight indicator suitable for various weighing applications, including static weighing, loading-unloading, and multicomponent dosage. It is designed for ease of installation and use, with customizable features and a multilingual menu.

Specifications:

Power Supply: 5 Vdc, supporting up to 8 load cells (350 Ohm each).
Measuring Range: -3.9 to +3.9 mV/V.
Input Sensitivity: Minimum 0.02 microV.
Linearity: Less than 0.01% FS.
Temperature Drift: Less than 0.001% FS/°C.
Display: Graphic LCD with 240x128 pixels.
A/D Converter: 24-bit with internal resolution up to 16,000,000.
Frequency Signal Acquisition: 12 to 1000 Hz.
Displayable Resolution: Up to 999,999 divisions on net weight.
Value Divisions: Selectable options include x1, x2, x5, x10, x20, x50 with 4 decimal points.
Filter: Selectable from 0.1 to 250 Hz.
Keyboard: 4-wire resistive touch screen.
Operating Temperature: -10 to +50°C with a maximum humidity of 85% (no condensation).
Storage Temperature: -20 to +70°C.
Logic Outputs: 6 opto-isolated, max 24 Vdc/100mA each.
Logic Inputs: 6 optically isolated 24 Vdc PNP (external power supply).
Additional I/O: Supports up to 4 external modules with 4 inputs/8 outputs each, totaling 16 inputs/32 outputs via independent RS485.
Serial Ports: 1 USB device, 1 RS232C, and 1 RS485/Fieldbus.
Optional Analog Output: Optoisolated 16-Bit with voltage options of 0 to 5/10 V (R min 10 K Ohm) and current options of 0/4 to 20 mA (R max 300 Ohm).
Analog Output Calibration: Via touch screen keyboard.
Analog Output Linearity: Less than 0.02% FS.
Temperature Drift Analog Output: 0.001% FS/°C.
Microcontroller: ARM Cortex M0+ 32-bit with 256KB Flash, reprogrammable via USB.
Data Storage: 64 Kbytes, expandable up to 1024 Kbytes.
Regulatory Compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety; EN45501 for metrology.
Electrical Connections: Removable screw terminal blocks (3.81mm pitch).
Dimensions: 150x95x26mm (LxWxH) including terminal blocks; 150x95x56mm (WxHxD) with fieldbus options; drilling template: 138x82mm.
Mounting Type: Panel mount.
Communication Protocols: ETHERNET 10/100 with TCP, MODUBUS/TCP, UDP, IP, ICMP, ARP; PROFINET; ETHERNET/IP; ETHERCAT.

Manufacturer Information: Pavone Sistemi S.r.l., located in Concorezzo, Italy. Contact details include phone: +39 039 9162656, fax: +39 039 9162675, email: [email protected], and website: www.pavonesistemi.it.

Note: All data is subject to change without notice.

Catalog excerpts

WEIGHING INSTRUMENTATION weight indicators MCT 1302 ETHERNET IP Touch screen weight indicator perfect for any type of weighing Practical, easy to install and use Perfect for static weighing and loading-unloading and multicomponent dosage Customizable according to necessity Multilingual menu 6 inputs and 6 outputs (optoisolated 24 Vdc) Internal data memory 64 Kbytes expandable up to 1024 Kbytes Fieldbus + analog output on board at the same time TECHNICAL CHARACTERISTICS MCT 1302 ETHERNET IP Power supply: Measuring range: Input sensitivity: Temperature drift: Frequency signal acquisition: Displayable resolution: 999.999 displayable divisions on net weight Value divisions (selectable): 4 wires resistive touch screen Power supply: Operating temperature: Storage temperature: Logic outputs: Logic inputs: 6 optically isolated 24 Vdc PNP (external power supply) up to 4 external modules with 4 in/8-out each (16 in/32 out, total) by independent RS485 Serial ports: Optional analogue output: optoisolated 16-Bit Voltage: 0 to 5/10 V (R min10 K Ohm), Current: 0/4 to 20 mA (R max 300 Ohm) Analog output calibration: keyboard (touch screen) Analog output linearity: Temperature drift analog output: ARM Cortex M0 + 32 bit 256KB Flash reprogrammable onboard from USB Data storage: 64 Kbytes expandable up to 1024 Kbytes Regulatory Compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety, EN45501 for metrology Electrical connections: removable screw terminal blocks (3.81mm pitch) 150x95x26mm (LxWxH) including terminal blocks; 150x95x56mm (WxHxD) with fieldbus options; drilling template: 138x82mm Pavone Sistemi S.r.l. via Tiberio Bianchi 11/13/15 • 20863 Concorezzo (MB) Italy Mounting type: panel mount Tel. +39 039 9162656 • Fax +39 039 9162675 • [email protected] • www.pavonesistemi.it Tutti i dati possono essere soggetti a variazione senza preavvisoETHERNET 10/100 con protocolli TCP, MODUBUS/TCP, Communication protocols: UDP, IP, ICMP, ARP; PROFINET; ETHERN

Open the catalog to page 1

WEIGHING INSTRUMENTATION weight indicators MCT 1302 ETHERNET IP Pavone Sistemi S.r.l. via Tiberio Bianchi 11/13/15 • 20863 Concorezzo (MB) Italy Tel. +39 039 9162656 • Fax +39 039 9162675 • [email protected] • www.pavonesistemi.it Tutti i dati possono essere soggetti a variazione senza pre

Open the catalog to page 2

OPTIONAL OUTPUT ANALOG OUTPUT OPTIONAL ETHERNET FIELDBUS Pavone Sistemi S.r.l. via Tiberio Bianchi 11/13/15 • 20863 Concorezzo (MB) Italy Tel. +39 039 9162656 • Fax +39 039 9162675 • [email protected] • www.pavonesistemi.it Tutti i dati possono essere soggetti a variazione senza preavviso

Open the catalog to page 3

MCT 1302 ETHERNET IP

MCT 1302 ETHERNET IP

Catalog excerpts

All Pavone sistemi catalogs and technical brochures