*mydirectindustry

DAT 500

Product catalog summary

Overview: The DAT 500 is a high-performance weight transmitter designed for reliability and versatility in weighing instrumentation. It supports RS232 or RS422/RS485 output with ASCII or MODBUS RTU protocols and offers a bipolar version of ±10V. The device can be programmed using the 1006 TESTER and is compatible with PROFIBUS and DEVICENET fieldbus systems through optional internal boards or external converters.

Key Features:

10-point linearization and calibration using transducer certificates.
Configuration and calibration via front panel or PC using USB, RS232/RS485 with INNOVATION™ software.
IP54 protection for the front panel.

Technical Specifications:

Transducer input voltage: 5 V (supports up to 6 load cells of 350 Ohm).
Measuring range: -0.5 to +3.5 mV/V (optional -3.9 to +3.9 mV/V).
Input sensitivity: 0.02 µV per count.
Linearity: Less than 0.01% of full scale.
Gain drift: Less than 0.001% full scale per °C.
Display: 6-digit red LED with 7 segments, 14 mm height.
A/D Converter: 24-bit with a resolution of over 16,000,000 counts.
Visible resolution: 60,000 divisions displayable on net weight.
Adjustable division values: x1, x2, x5.
Filter: Adjustable from 0.1 to 25 Hz.
Operating temperature range: -10 to +50 °C; Storage temperature: -20 to +70 °C.
Logic outputs: 2 solid-state relays (max load 24 Vdc / 100 mA each).
Logic inputs: 2 optoisolated 24 V c.c. PNP.
Serial communication: RS232C or RS422/RS485 with adjustable baud rates up to 115200.
Optional analog output: Optoisolated 16-bit tension (0-5/10V) and current (0/4-20mA).
Regulatory compliance: EN61326-1, EN55011, EN55014 for EMC; EN61010-1 for electrical safety.
Dimensions: 96 x 48 x 120 mm; Weight: 250 g.

Additional Information: The DAT 500 includes a peak hold function for dynamic measurements and supports various fieldbus communications such as CANopen, Modbus-Plus, and Ethernet. The device is manufactured by Pavone Sistemi S.r.l., located in Cavenago Brianza, Italy.

Catalog excerpts

Weighing Instrumentations weight transmitters The connection can also be done through the external converter Calibration done using certificates of transducers Configuration and calibration from the front panel or PC via the USB serial port, RS232/RS485 with the program INNOVATION™ (MS Windows) IP54 protection (front panel) Directly connectable to PROFIBUS Fieldbus and to DEVICENET with optional internal board High performance and reliability RS232 or RS422/RS485 output, ASCII Protocols or MODBUS RTU Upload and download function for programming with 1006 TESTER

Open the catalog to page 1

TECHNICAL CHARACTERISTICS DAT 500 Trasducer input voltage: Measuring range: Input sensitivity: Linearity: Gain drift: Display: LED status: A/D Converter: Resolution: Visible resolution: Divisions value (adjustable): Set decimal: Filter: Keyboard: Tool voltage: Temperature range: Storage temperature: Logic output: Logic input: Serial door: Transmission distance: FIELDBUS protocol: Others fieldbus comunication: Peak Hold function: Baud rate: Analogic optional output: Regulatory compliance: Electrical connection: Dimensions and weight: Drilling template: BCD output: 5 V (max 6 load cells 350 Ohm)...

Open the catalog to page 2

DAT 500

DAT 500

Catalog excerpts

All Pavone sistemi catalogs and technical brochures