*mydirectindustry

DAT 400

Product catalog summary

Overview: The document provides technical specifications and features of the DAT 400 weight transmitter by Pavone Sistemi, highlighting its high performance, reliability, and connectivity options.

Key Features:

Exclusive worldwide dealing by Pavone Sistemi.
Connectivity options include USB port, RS232, RS422/RS485, and optional internal boards for PROFIBUS, DEVICENET, and PROFINET.
Supports ASCII Protocols or MODBUS RTU.
Capable of connecting up to 32 addressable units to a PC or PLC.
10 points linearization and calibration using transducer certificates.
Configuration and calibration via front panel or PC using USB or RS232/RS485 with INNOVATION™ software.

Technical Specifications:

Transducer input voltage: 5 V (supports up to 6 load cells of 350 Ohm).
Measuring range: -0.5 to +3.5 mV/V (optional -3.9 to +3.9 mV/V).
Input sensitivity: 0.02 microV/division.
Linearity: < 0.01% FS; Gain, drift: < 0.001% FS/°C.
Display: 6-digit red LED, 14 mm height.
A/D Converter: 24 bit with resolution > 16,000,000 counts.
Visible resolution: 60,000 divisions displayable on net weight.
Adjustable divisions value: x1, x2, x5; Decimal: 0.0, 0.00, 0.000.
Filter: Adjustable 0.1 to 25 Hz.
Keyboard: 4 tactile feedback buttons.
Tool voltage: 24 Vcc ±15%, power 5 W.
Temperature range: -10 to +50 °C; Storage: -20 to +70 °C.
Logic output: 2 solid-state relays (max load 24 Vdc / 100 mA each).
Logic input: 2 optoisolated 24 Vcc PNP (external voltage).
Serial communication: USB, RS232C, RS422/RS485 with ASCII or Modbus RTU protocols.
Transmission distance: 15m (RS232C), 1000m (RS422/RS485).
Fieldbus protocol: PROFIBUS, DEVICENET (optional); others include CANopen, Modbus-Plus.
Peak Hold function for dynamic measures.
Baud rate: Adjustable 2400, 9600, 19200, 38400, 115200.
Optional analog output: Optoisolated 16 Bit, Tension: 0-5/10 V, Current: 0/4-20 mA.
Regulatory compliance: EN61326-1, EN55011, EN55014 for EMC; EN61010-1 for electrical safety.
Electrical connection: Screw terminals 5 mm.
Dimensions and weight: 106 x 90 x 58 mm; 250 g.
Optional BCD output.

Contact Information: Pavone Sistemi S.r.l., via Dei Chiosi, 18 - 20873 Cavenago Brianza (MB) Italy. Tel: 02 95339165, Fax: 02 9501252, Email: [email protected], Website: www.pavonesistemi.it

Note: All data are subject to change without notice.

Catalog excerpts

Weighing Instrumentations weight transmitters Up to 32 addressable units, connectable to a PC or PLC Calibration done using certificates of transducers Configuration and calibration from the front panel or PC via the USB serial port, RS232/RS485 with the program INNOVATION™ (MS Windows) High performance and reliability Directly connectable to PROFIBUS Fieldbus or DEVICENET with optional internal board. Now available also with PROFINET USB port, output RS232 or RS422/RS485, ASCII Protocols or MODBUS RTU Pavone Sistemi's WORLDWIDE EXCLUSIVE DEALING Upload and download function for programming with 1006 TESTER

Open the catalog to page 1

TECHNICAL CHARACTERISTICS DAT 400 Trasducer input voltage: Measuring range: Input sensitivity: Linearity: Gain, drift: Display: LED status: A/D Converter: Resolution: Visible resolution: Divisions value (adjustable): Decimal: Filter: Keyboard: Tool voltage: Temperature range: Storage Temperature: Logic output: Logic input: Serial door: Transmission distance: FIELDBUS protocol: Others fieldbus comunication: Peak Hold function: Baud rate: Analog output optional: Regulatory compliance: Electrical connection: Dimensions and weight: BCD output: 5 V (max 6 load cells 350 Ohm) -0.5 ÷ +3.5 mV/V (-3.9...

Open the catalog to page 2

DAT 400

DAT 400

Catalog excerpts

All Pavone sistemi catalogs and technical brochures