1. Catalogs
  2. Pavone sistemi
  3. DAT 1400 AN/RS485 MOD

DAT 1400 AN/RS485 MOD
1 /4Pages

DAT 1400 AN/RS485 MOD

DAT 1400 AN/RS485 MOD
1 /4Pages

Catalog excerpts

DAT 1400 AN/RS485 MOD-1

WEIGHING INSTRUMENTATIONweight transmitters DAT 1400 AN/RS485 MOD Frequency acquisition A/DC signal up to 1000 Hz DATALOGGER function (optional) Capacitive keyboard & removable screw terminal blocks Fieldbus + analog output on board at the same time Mounting Type: DIN rail & assembly kits for front-panel Available also in the new version Analog-Bipolar Future options: - Analog voltage/current input - Connection to I-BOX external via RS485 TECHNICAL CHARACTERISTICS DAT 1400 AN/RS485 MOD Power supply: Measuring range: Input sensitivity: Linearity: Temperature drift: Display: A/D converter: Internal resolution: Frequency signal acquisition: Displayable resolution: Value divisions (selectable): Decimals setting: Filter: Keybord: Instrument power supply: Operating temperature: Storage temperature: Logic outputs: Logic inputs: Serial ports: Peak Hold function: Analog output: Analog output linearity: Temperature drift analog output: Microcontroller: Data storage: 5 Vdc (max 8 -350 Ohm- load cells) -3.9 - +3.9 mV/V 0.02 microV/div < 0.01% FS < 0.001% FS/ °C 6 digit, 7-segment LED red, height 14mm 24 bit > di 16.000.000 points 12 + 1000 Hz 999.999 displayable divisions on net weight x1, x2, x5, x10, x20, x50 0.0 ; 0.00 ; 0.000; 0.0000 Selectable 0.5 to 1000 Hz capacitive, 4 keys 12-24 Vdc ± 15% - Power consumption 5 W -10/+ 50 ° C (humidity max 85% no condensation) -20/+70°C 2 opto-isolated; MAX 24 Vdc/100 mA each 2 opto-isolated 24 Vdc PNP (external power supply) 1 USB device + 1 RS232C + 1 RS485/Fieldbus; ASCII or Modbus RTU protocoll for dynamic measurements optoisolated 16-Bit Voltage: 0 to 5/10 V (R min10 K Ohm), Current: 0/4 to 20 mA (R max 300 Ohm) < 0,02% FS 0,001% FS / °C ARM Cortex M0 + 32 bit 256KB Flash reprogrammable onboard from USB 64 Kbytes expandable up to 1024 Kbytes Regulatory Compliance: Electrical connections: 5 mm terminal blocks, removable Pavone Sistemi S.r.l. via Tiberio Bianchi 11/13/15 • 20863 Concorezzo (MB) Italy Tel. +39 039 9162656 • Fax +39 039 9162675 • [email protected] • www.pavonesistemi.it Tutti i dati possono essere soggetti a variazione senza preavviso

 Open the catalog to page 1
DAT 1400 AN/RS485 MOD-2

WEIGHING INSTRUMENTATION weight transmitters DAT 1400 AN/RS485 MOD Pavone Sistemi S.r.l. via Tiberio Bianchi 11/13/15 • 20863 Concorezzo (MB) Italy Tel. +39 039 9162656 • Fax +39 039 9162675 • [email protected] • www.pavonesistemi.it Tutti i dati possono essere soggetti a variazione senza pre

 Open the catalog to page 2
DAT 1400 AN/RS485 MOD-3

Serial communication interface

 Open the catalog to page 3
DAT 1400 AN/RS485 MOD-4

Pavone Sistemi S.r.l. via Tiberio Bianchi 11/13/15 • 20863 Concorezzo (MB) Italy Tel. +39 039 9162656 • Fax +39 039 9162675 • [email protected] • www.pavonesistemi.it Tutti i dati possono essere soggetti a variazione senza prea

 Open the catalog to page 4

All Pavone sistemi catalogs and technical brochures

  1. MKX ®

    2  Pages

  2. MCT 1302

    3  Pages

  3. E-LINK 3000

    2  Pages

  4. DAT 500

    2  Pages

  5. DAT 100

    2  Pages

  6. DAT 200

    2  Pages

  7. DAT 400

    2  Pages

  8. MC 382

    2  Pages

  9. CVF

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.