RADIAFLEX ® DESCRIPTION Metalwork : mild steel, plated. Natural rubber, bonded, cylindrically shaped. Welded fixings : 5 styles (single side threaded stud, single side threaded hole, double threaded stud, double threaded hole,combination fixing). European thread standards are not always consistent with French thread standards so Paulstra has created the Radiaflex® Europe range based on those standards. The end stop version is now available with a threaded hole in addition to the threaded stud. CHARACTERISTICS The design of the RADIAFLEX® mount gives the following basic characteristics: n n radial elasticity greater than axial elasticity. the rubber works in : - compression (axial), - shear (radial), - compression/shear according to the fixing method. Advantages Simple to fix. n Simple and economical. n Extensive range : - 13 stud diameters. - Several heights for each diameter. - 5 methods of fixing. Recommendations n Operation in shear is very useful for vibration isolation provided that the radial forces are not too great. PAULSTRA - 61 rue Marius Aufan - 92309 Levallois-Perret Cedex - France - T. +33 1 40 89 53 31 - F. +33 1 47 25 28 96 www.paulstra-industry.com

DIMENSIONS AND COMPRESSIVE LOADS Double stud fixing Single stud fixing Threaded studs Threaded hole fixing on request (except Ø 12.5). See current price list for availability of items. * The shear characteristics are measured under axial load.

Combination fixing Threaded hole fixing Ø 16 mounts with threaded holes are fitted with RAPID nuts. Maximum torque 1.8 m.N. See current price list for availability of items. * Shear characteristics are measured under axial load.

See current price list for availability of items. ØA (mm) * Shear characteristics’ are measured under axial load. Compression The fixing holes for the Radiaflex mounts should have a chamfer with a depth equal to the pitch of the thread. Ex. 521401 : M10 x 150 chamfer = 1,5 mm 521951 : M16 x 200 chamfer = 2 mm