JUBOFLEX® TYPE S
2Pages

{{requestButtons}}

Catalog excerpts

JUBOFLEX® TYPE S - 1

Torsional flexibility Radial flexibility Axial flexibility Conical flexibility Flexible element  Precompressed natural rubber.  Bonded metal reinforcing mountings.  Precompression band (to be removed after installation). Flange  Die-cast steel (except 632267 which is cast-iron). OPERATION The JUBOFLEX «S» coupling is designed with the following features : n radial disassembly without moving the machines that are coupled; n the flexible element is compressed during assembly, which extends the range of operating conditions where the rubber is not subject to tension. Advantages JUBOFLEX «S» has a greater load capacity than the standard JUBOFLEX. n Highly effective attenuation of cyclic irregularities and peaks in the torque. n Due to the precompression, the JUBOFLEX «S» has very good resistance to torsional peaks. n Tolerance to large misalignment: avoids the need for precise alignment of the machines to be coupled. n Recommendation n In use, precompression is achieved by the fixing bolts, and the JUBOFLEX «S» coupling operates without the precompression band round the flexible element.

Open the catalog to page 1
JUBOFLEX® TYPE S - 2

Flanges supplied unbored JUBOFLEX Steel flanges except 632267 JUBOFLEX Cast-iron flanges : ref. 632267 Coupling without * Cet element a 8 trous de fixation. OPERATING CHARACTERISTICS

Open the catalog to page 2

All PAULSTRA catalogs and technical brochures

  1. STRAFLEX®

    2 Pages

  2. JUBOFLEX®

    2 Pages

  3. MPP®

    4 Pages

  4. MINIFLEX®

    4 Pages

  5. V402-MG

    2 Pages

  6. VIBSOL ®

    2 Pages

  7. RADIAFLEX®

    4 Pages

  8. Metal Mounting

    74 Pages

  9. Flexible Mounts

    164 Pages