vCOM - Communication Systems SMGM | SMGX
16Pages

{{requestButtons}}

Catalog excerpts

vCOM - Communication Systems SMGM | SMGX - 1

vCOM – COMMUNICATION SYSTEMS SMGM | SMGX

Open the catalog to page 1
vCOM - Communication Systems SMGM | SMGX - 2

SMGM | SMGX – KEY HIGHLIGHTS WIDE RANGE OF APPLICATIONS With the vCOM product family for mobile data transmission, VAHLE serves indoor installations with the SMGM as well as outdoor installations with the SMGX. This product variety offers a selection for different segment lengths and mechanical tolerances. HF-SECURE The SMG profile’s interference-free design prevents signals from transmitting beyond the aluminum housing, allowing it to work alongside other industrial free radio systems. A radio license is not required. All HF components are factory tested and measured before each delivery,...

Open the catalog to page 2
vCOM - Communication Systems SMGM | SMGX - 3

SMGM | SMGX – OPERATION Modern production requires expansive volumes of data transmission for diagnosis and management. While this data is often transmitted for simple transport tasks in mobile applications via concutor linces with low transmission rates, this method of communication cannot stand up to the requirements of more complex applications that demand higher data rates. The data communication system SMGM (Slotted Microwave Guide Mini) was especially developed for these applications and enables the integration of fail-safe data transmission into proven VAHLE conductor systems. The...

Open the catalog to page 3
vCOM - Communication Systems SMGM | SMGX - 4

SMGM – SYSTEM OVERVIEW 3 1 DIAGNOSIS SEGMENT 1 SMGM Stationary Segment Interface 2 SMGM Mobile Segment Interface 3 SMGM HF Cable 4 SMGM Profile 5 SMGM Track Change 6 SMGM Mobile Coupler 7 SMGM System Controller

Open the catalog to page 4
vCOM - Communication Systems SMGM | SMGX - 6

SMGM – DIAGNOSIS / SERVICE COMPONENT AND SYSTEM QUALITY SURVEILLANCE All SMGM components are under surveillance via the system controller regarding their availability. If one of the components becomes inoperative, a respective prompt will be sent to the superordinate management component/controller. For safe operation, compliance with different communication parameters (e.g. levels) is necessary. The stationary interface permanently monitors the compliance of these system-relevant parameters. If one of these parameters is not met, the system controllers receives an error message via...

Open the catalog to page 6
vCOM - Communication Systems SMGM | SMGX - 7

SMGM – SWITCH CONCEPT / SMGM-TC SWITCH CONCEPT For interruption-free communication, a stationary source interface’s HF signal is split at feed switches to both turnout segments via HF splitters. Inlet: Stationary Interface SMGM-SI 1 Outlet: Switch Segment 1 Outlet: Switch Segment 2 SMGX – SYSTEM OVERVIEW 1 SMGM Stationary Segment Interface 2 SMGM Mobile Segment Interface S7 SPS1 3 SMGM HF Cable 4 SMGX Profile 5 SMGX Mobile Coupler PROFINET SWITCH Inscribing Inscribing with dimensions

Open the catalog to page 7
vCOM - Communication Systems SMGM | SMGX - 8

INFORMATION FOR USING INTERFACES Only components of the same system can be used with each other. I.e. if the interface on the stationary side has .standard configuration," the interface on the mobile side must also have .standard configuration." The stationary interface SMGM-SI-2 can only be used in conjunction with the BCC/SMGM-PN and a VAHLE DCS control. The SMGM-RU is a universal spare unit. It is the only interface that can adopt the configuration of any other interface.

Open the catalog to page 8
vCOM - Communication Systems SMGM | SMGX - 9

LITE VERSION The LITE version is applied in applications with one segment and up to four mobile users. Application: Intralogistics STANDARD VERSION The Standard version is applied in applications with min. one segment and up tp 15 mobile users. Applications: Intralogistics, EMS and Skillet ADVANCED VERSION The Advanced version is applied in applications with one segment and up to three mobile users. Applications: Intralogistics and EMS The properties of the SMGM-RU (Replacement Unit) depend on the configuration. Segment length depends on the number of mobile couplers and the used HF cables

Open the catalog to page 9
vCOM - Communication Systems SMGM | SMGX - 10

The properties of the SMGM-RU (Replacement Unit) depend on the configuration.

Open the catalog to page 10
vCOM - Communication Systems SMGM | SMGX - 11

RANGE OF PRODUCTS: <5 M LENGTH Description

Open the catalog to page 11
vCOM - Communication Systems SMGM | SMGX - 13

RANGE OF PRODUCTS Description RANGE OF PRODUCTS Description It is a matter of a pseudo order number. Our Techsales will check the profile components in detail by ordering.

Open the catalog to page 13
vCOM - Communication Systems SMGM | SMGX - 14

RANGE OF PRODUCTS Description RANGE OF PRODUCTS Description

Open the catalog to page 14
vCOM - Communication Systems SMGM | SMGX - 15

RANGE OF PRODUCTS Description SMGM - SYSTEM INTEGRATION EXAMPLE: EMS APPLICATION1 ^1 In this application, the SMGM profile is mounted between the APOS optic Datamatrix Code Strip and U10 profile as part of the EMS profile. [2 The SMGM mobile coupler is integrated between the APOS Optic reading head and the U10 current collector. ,3 A special bracket provides a common mounting plate for the APOS Optic reading head, the U10 current collector and also for the SMGM mobile coupler. More system combinations are available on request, please contact our Techsales in case of need. Please take into...

Open the catalog to page 15
vCOM - Communication Systems SMGM | SMGX - 16

Paul Vahle GmbH & Co. KG Westicker Str. 52 59174 Kamen Germany Tel.: +49 2307 704-0 Fax: +49 2307 704-444 info@vahle.de W1105485-E/00/en | 500 | Rev.04 | 02/19 | Errors and technical modifications subject to change.

Open the catalog to page 16

All Paul Vahle GmbH & Co. KG catalogs and technical brochures

  1. BOK System

    4 Pages

Archived catalogs