*mydirectindustry

Urma tool

Product catalog summary

Overview: This document outlines the technical specifications and guidelines for using URMA's IntraMax and fine boring head systems, focusing on face grooving and boring operations. It emphasizes the synergy benefits of these tools and provides detailed specifications for components and inserts.

Specifications:

Face Grooving with URMA IntraMax: Suitable for diameters starting from Ø 0.2 mm with Insert Type 105 or from Ø 6.0 mm with Insert Type 110.
Boring with URMA Fine Boring Head: CBN inserts are available from Ø 3 mm and PKD inserts from Ø 4 mm for operations in cast iron or hardened materials.
Maximum Depth (tmax): Up to 5.0 mm with Insert Type 105, up to 30 mm with Insert Type A110, and up to 3.0 mm with Insert Type 315.

System Components:

Adaptor with Beta Module: Available in sizes 40/63.
Fine Boring Head 05: Compatible with various inserts and toolholders.
System Holder URMA Type: Includes Betamodul sizes 25/32/40/50/63/80/100.

Spare Parts and Accessories:

Includes threaded pins, coolant tubes, and toolholders.
Toolholders are compatible with both right and left-hand inserts and feature a double-sided clamping surface for flexibility.

Ordering Information:

Coolant tubes are not included and must be ordered separately.
Part numbers and dimensions are provided for various components and inserts.

Insert Types and Recommendations:

Various insert types are available for different bore diameters, starting from Ø 0.2 mm to Ø 5.0 mm and above.
Recommendations for carbide grades and coating options are provided, with main and alternative recommendations highlighted.

Carbide Grades: The document provides detailed specifications and recommendations for various carbide grades used in machining operations, including part numbers, dimensions, and guidelines for selecting the appropriate grade based on material and machining conditions.

Procedures: It outlines procedures for face grooving and chamfering, specifying dimensions and angles required for each operation, and provides cutting data for different materials with recommended cutting speeds and feed rates.

Standards and Recommendations: Recommendations for the main and alternative applications of each carbide grade are included, highlighting their availability status.

Key Data from Tables: Tables provide detailed cutting speeds and feed rates for various materials and carbide grades, essential for selecting the appropriate carbide grade based on specific machining requirements.

Critical Information: Emphasizes the importance of selecting the correct carbide grade based on the material being machined and the desired cutting conditions, with guidelines for choosing between uncoated and coated grades.

Catalog excerpts

Axialeinstechen mit URMA-IntraMax und Ausspindeln mit URMA-Feinbohrkopf Face grooving with URMA IntraMax and boring with URMA fine boring head Synergieeffekte nutzen Benefits of Synergy O O1

Open the catalog to page 1

Boring with Fine boring head URMA 05 Face grooving with URMA-lntraMax Ausspindein von Gussteilen oder tipped inserts are also available for boring opera- tions in cast iron or hardened materials. with Insert Type 105 with Insert Type A110 with Insert Type 315

Open the catalog to page 2

Adaptor with Beta module 40/63 Fine boring head 05 Oder / or

Open the catalog to page 3

AXIALEINSTECHEN SYSTEM URMA FACE GROOVING SYSTEM URMA SYSTEM HOLDER URMA Type Spare parts

Open the catalog to page 4

AXIALEINSTECHEN SYSTEM URMA FACE GROOVING SYSTEM URMA SYSTEM HOLDER URMA Type URM Spare parts

Open the catalog to page 5

AXIALEINSTECHEN SYSTEM URMA FACE GROOVING SYSTEM URMA SYSTEM HOLDER URMA Type URM Spare parts

Open the catalog to page 6

AXIALEINSTECHEN SYSTEM URMA FACE GROOVING SYSTEM URMA SYSTEM HOLDER URMA Type Spare parts

Open the catalog to page 7

AXIALEINSTECHEN SYSTEM URMA FACE GROOVING SYSTEM URMA SYSTEM HOLDER URMA Type Spare parts Das Kühlmittelrohr ist nicht im Lieferumfang enthalten - bitte séparât bestellen! Ordering note: Coolant tube ist not included - separate order requiered!

Open the catalog to page 8

Adaptor with Beta module 40 / 63 Fine boring head 05 Special solutions

Open the catalog to page 9

AUSSPINDELN SYSTEM URMA BORING SYSTEM URMA FINE BORING HEAD Type Betamodul 40 max. Drehzahl Number of revolutions 20.000 1/min Verstellbereich Adjustable range 3,0 mm Spare parts

Open the catalog to page 10

AUSSPINDELN SYSTEM URMA BORING SYSTEM URMA TOOLHOLDER Type with through coolant supply for use with boring head type 05 Durch die doppelseitige Spannflàche kann der Klemmhalter im Feinbohrkopf um 180° gedreht werden, somit ist ein Verstellen hinter Mitte für Bohrungen kleiner 0 0,7 mm realisierbar. The double sided clamping surface allows to rotate the toolholder in the boring head of 180° . With this option it is possible to set the insert behind centre which is necessary for diameters lass than 0 0,7 mm. Klemmhalter sind jeweils für rechte und linke Schneidplatten verwendbar. Toolholders can...

Open the catalog to page 11

AUSSPINDELN SYSTEM URMA BORING SYSTEM URMA TOOLHOLDER Type with through coolant supply for use with boring head type 05 Klemmhalter sind jeweils für rechte und linke Schneidplatten verwendbar. Toolholders can be used with right and left hand inserts. Spare parts

Open the catalog to page 12

Open the catalog to page 13

INSERT Type R = right hand version shown L = left hand version Ausführung R oder L angeben Carbide grades

Open the catalog to page 14

INSERT Type R = right hand version shown L = left hand version O bedingt einsetzbar/ alternative recommendation I unbeschichtete HM-Sorten / uncoated grades beschichtete HM-Sorten / coated grades bestÜckt/Cermet / brazed/Cermet Ausführung R oder L angeben Carbide grades

Open the catalog to page 15

INSERT Type R = right hand version shown L = left hand version 0 bedingt einsetzbar/ alternative recommendation unbeschichtete HM-Sorten / uncoated grades beschichtete HM-Sorten / coated grades Ausführung R oder L angeben Carbide grades

Open the catalog to page 16

INSERT Type R = right hand version shown L = left hand version Part number ▲ ab Lager / on stock A 4 Wochen / 4 weeks • Haupteinsatzbereich / main recommendation O bedingt einsetzbar/ alternative recommendation unbeschichtete HM-Sorten / uncoated grades beschichtete HM-Sorten / coated grades Ausführung R oder L angeben Carbide grades

Open the catalog to page 17

Open the catalog to page 18

Open the catalog to page 19

INSERT Type right hand version shown L = left hand version with chip breaker Ausführung R oder L angeben Carbide grades

Open the catalog to page 20

INSERT Type R = right hand version shown L = left hand version Dimensions in mm Carbide grades Ausführung R oder L angeben

Open the catalog to page 21

INSERT Type R = right hand version shown L = left hand version Part number Á ab Lager / on stock A 4 Wochen / 4 weeks • Haupteinsatzbereich / main recommendation 0 bedingt einsetzbar / alternative recommendation unbeschichtete HM-Sorten / uncoated grades beschichtete HM-Sorten / coated grades bestÜckt/Cermet / brazed/Cermet Ausführung R oder L angeben Carbide grades

Open the catalog to page 22

INSERT Type with extended clamping shank R = right hand version shown L = left hand version ▲ ab Lager / on stock A 4 Wochen / 4 weeks • Haupteinsatzbereich / main recommendation O bedingt einsetzbar / alternative recommendation unbeschichtete HM-Sorten / uncoated grades beschichtete HM-Sorten / coated grades bestiickt/Cermet / brazed/Cermet Ausfiihrung R oder L angeben Carbide grades

Open the catalog to page 23

INSERT Type R = right hand version shown L = left hand version Ausführung R oder L angeben Carbide grades

Open the catalog to page 24

ÜBERSICHT SUMMARY Aufnahme mit Betamodul 40 / 63 Adaptor with Beta module 40 / 63 Grundaufnahme Zwischenkonsole Intermediate adaptors Basic holder IntraMax 49-88 oder / or IntraMax 87-207 IntraMax 49-88 oder / or IntraMax 87-207 Durchmesserkonsole Durchmesserkonsole Ausgleichsgewicht Einbauhalter Balance weight Sonderlösungen Cartridge Special solutions O BKT105 BKT110 BKT105 BKT356 O25

Open the catalog to page 25

SYSTEM URMA SYSTEM URMA BASIC HOLDER URMA Type Direct mounting for cartridge type BKT105.U90K.01 and BKT356.U90K.05 for balance weight type 020.U00K.040 for diameter bracked type 22 03... Spare parts

Open the catalog to page 26

SYSTEM URMA Zwischenkonsole URMA Intermediate adaptors URMA ■Anschluss Betamodul direct mounting for cartridge type BKT105.U90K.01 for balance weight type 020.U00K.040 for diameter extender type 22 03... coupling Beta module Durchmesserkonsole URMA IntraMax 49-88 Diameter extender URMA - Direct mounting for cartridge type BKT105.U90K.01 or J r~ Spare parts

Open the catalog to page 27

All Paul Horn catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list