2.92mm Female to 3.5mm Female Adapter RF Adapters Technical Data Sheet Configuration • 2.92mm Female Connector 1 • 3.5mm Female Connector 2 • 50 Ohm • Straight Body Geometry Features • Max VSWR of 1.25:1 up to 34 GHz • Contact plating according to ASTM-B488, ASTM-B689 • Gold over Electrolytic Nickel Plated Beryllium Copper Contact • Max VSWR of 1.25:1 up to 34 GHz • Gold over Electrolytic Nickel Plated Beryllium Copper Contact • Contact Plating per ASTM-B488, ASTM-B689 Applications • Allows Connection Between Series • General Purpose Test • Allows Connection Between Series • General Purpose Test Description Pasternack’s PE9660 2.92mm female to 3.5mm female adapter is part of our full line of RF components available for sameday shipping. The 2.92mm connector mates mechanically with commercially available SMA and 3.5mm connectors. Our 2.92mm to 3.5mm adapter has a female to female gender configuration. PE9660 2.92mm female to 3.5mm female adapter operates to 34 GHz. The Pasternack RF adapter provides excellent VSWR of 1.25:1 maximum. RF adapters are often used to enable connections between two connector types that would otherwise not mate. Certain adapter configurations can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. An RF, microwave or millimeter wave adapter is connected to the equipment, and the commonly changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters are referred to as connector savers. Pasternack also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs. Electrical Specifications Frequency Range VSWR 1.25:1 Insertion Loss Dielectric Withstanding Voltage (AC) High Potential Voltage 5 to 7.5 MHz Corona Discharge at 70,000 ft Insulation Resistance Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 2.92mm Female to 3.5mm Female Ad

2.92mm Female to 3.5mm Female Adapter RF Adapters Technical Data Sheet Electrical Specification Notes: Values at 25°C, sea level. Insertion Loss = 0.04 x sqrt(FGHz) dB Max Mechanical Specifications Size Length Width Weight Standard Standard Mating Cycles Material Specifications Beryllium Copper Gold over Electrolytic Nickel Beryllium Copper Gold over Electrolytic Nickel ASTM-B488, ASTM-B689 Insulation PCTFE PCTFE Outer Conductor Passivated Stainless Steel Passivated Stainless Steel Environmental Specifications Temperature Operating Range Humidity Shock Vibration Thermal Shock Salt Spray MIL-STD-202,...

ia Ft PASTERNACK M* THE ENGINEER'S RE SOURCE 2.92mm Female to 3.5mm Female Adapter Typical Performance Data 2.92mm Female to 3.5mm Female Adapter from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99.4% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 2.92mm Female to 3.5mm Female Adapter PE9660 URL: https://www.pasternack.com/3.5mm-female-2.92mm-female-straight-adapter-pe9660-p.aspx...

Phone: (949) 261-1920 | Fax: (949) 261-7451 Website: www.pasternack.com | E-Mail: [email protected] Pasternack Enterprises, Inc. P.O. Box 16759 | Irvine | CA | 92623 *STANDARD TOLERANCES APPLY ONLY TO DIMENSIONS IN INCHES NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 2.92mm Female to 3.5mm Female Adapter