iPF=i PASTERNACK THE ENGINEER'S RF SOURCE SMA Calibrated Noise Source Module, Output ENR of 30 dB, +28 VDC, 0.01 MHz to 2 GHz Noise Generators Technical Data Sheet PE85N1001 Features • 10 KHz to 2000 MHz Bandwidth • Calibrated Frequencies: 10 • 100 • 1000 • 2000 MHz • High Output ENR 30 dB min • Typical Flatness +/- 1.5 dB Applications • Noise Figure Measurements • Built-In Test equipment for signal strenth calibrators and radar applications • Automatic Test Equipment (ATE) Excellent Stability Noise Output Temperature Variation: <0.01 dB/°C Noise Output Variation <0.1 dB/%V Rugged Package Design supports output Female SMA connector Designed to meet MIL-STD-202F environmental test conditions • Jamming • Baseband Signal Simulation • Additive White Gausian Noise (AWGN) source for Error Rate Measurements • Increase dynamic range of A/D Converters • SATCOM for bit error rate (BER) and noise figure • Can be used as a Jitter source. Description The PE85N1001 is a coaxial packaged Noise Source module which operates over a wide frequency range from 10 KHz to 2 GHz. The design is calibrated for 10, 100, 1000, and 2000 MHz frequencies and is ideal for Noise Figure measurements and a variety of built-in test applications. This model operates at +28 Vdc and features a high Output ENR level of 30 dB min, typical flatness across the entire frequency band is +/- 0.5 dB, and excellent stability. Performance is specified over -55°C to +85°C with Noise Output Temperature Variation <0.01 dB/°C, Noise Output Variation <0.1 dB/%V. The rugged package design supports an output Female SMA connector with an EMI/RFI filter voltage pin and ground tab. Additionally, the model is designed to meet a variety of demanding MIL-STD-202F environmental test conditions including Humidity, Thermal Shock, and Vibration for added confidence for highly reliable operation. Electrical Specifications Frequency Range Impedance Output ENR Flatness VSWR Bias Voltage 1 Input Current 1 Calibration Points Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Calibrated Noise Source Module, Output ENR of 30 dB, +28 VDC, 0.01 MHz to 2 GHz PE85N1001 Pasternack Enterprises, Inc. • P.O. Box 16759, Irvine, CA 92623 Phone: (866) 727-8376 or (949) 261-1920 • Fax: (949) 261-7451 [email protected] • [email protected] © 2016 Pasternack Enterprises All Rights Reserved

iPF=i PASTERNACK THE ENGINEER'S RF SOURCE SMA Calibrated Noise Source Module, Output ENR of 30 dB, +28 VDC, 0.01 MHz to 2 GHz Size Length Width/Dia. Height Weight Package Type Connectors DC Connector Output Connector Environmental Specifications Temperature Operating Range Storage Range Environment Humidity Shock Vibration Altitude Temperature Cycle Thermal Shock ESD Sensitivity MIL-STD-202F, Method 103, Cond B (96 hrs@95% R.H.) MIL-STD-202F, Method 213, Cond B (100g, 6 msec) MIL-STD-202F,Method 204,Cond B(0.6” 2x ampl or15g) MIL-STD-202F, Method 105, Condition B (50,000 ft) MIL-STD-202F, Method...

iPF=i PASTERNACK THE ENGINEER'S RF SOURCE SMA Calibrated Noise Source Module, Output ENR of 30 dB, +28 VDC, 0.01 MHz to 2 GHz Typical Performance Data ENR Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Calibrated Noise Source Module, Output ENR of 30 dB, +28 VDC, 0.01 MHz to 2 GHz PE85N1001 Pasternack Enterprises, Inc. • P.O. Box 16759, Irvine, CA 92623 Phone: (866) 727-8376 or (949) 261-1920 • Fax: (949) 261-7451 [email protected] • [email protected] © 2016 Pasternack...

iPF=i PASTERNACK THE ENGINEER'S RF SOURCE SMA Calibrated Noise Source Module, Output ENR of 30 dB, +28 VDC, 0.01 MHz to 2 GHz SMA Calibrated Noise Source Module, Output ENR of 30 dB, +28 VDC, 0.01 MHz to 2 GHz from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Calibrated...

iPF=i PASTERNACK THE ENGINEER'S RF SOURCE SMA Calibrated Noise Source Module, Output ENR of 30 dB, +28 VDC, 0.01 MHz to 2 GHz Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Calibrated Noise Source Module, Output ENR of 30 dB, +28 VDC, 0.01 MHz to 2 GHz PE85N1001 URL: http://www.pasternack.com/sma-calibrated-noise-source-enr-30-db-2-ghz-pe85n1001-p.aspx The information contained in this document is accurate to the best of our knowledge and representative of the part described herein....

PE85N1001 CAD Drawing SMA Calibrated Noise Source Module, Output ENR of 30 dB, +28 VDC, 0.01 MHz to 2 GHz © 2016 Pasternack Enterprises All Rights Reserved PE85N1001 REV 1.1 6