PE3CA1103
1 / 4Pages

Catalog excerpts

/pel PASTERN A CK* MM THE ENGINEER'S RF SOURCE Pigtail Test Probe Cable SMA Female to Flush Cut Lead Using PE-047SR Coax, RoHS Configuration • Connector 1: SMA Female • Connector 2: Flush Cut Lead • Cable Type: PE-047SR Features • 100% RF Tested prior to final trim • 1.35 Max VSWR to 6 GHz • 100% High Pot Tested to 500V • .047 Diameter Semi Rigid coax • Individually packed in protective tube Applications • Used as an RF Test Probe to 6 GHz RF PCB board measurements Signal injection Description These SMA Female to unterminated flush cut cables assemblies are designed to be used as convenient test probes. The unterminated end of the cable can be trimmed by the user to their desired dimensions. A common Research and development application is to solder the trimmed end of the cable to an exposed microstrip trace to inject a signal or to measure a signal of interest. Each cable assembly is individually packaged in a reusable protective tube. These test probes have been 100% RF tested as a two ended assembly prior to trimming in order to verify the assemblies perform to 6 GHz with a maximum VSWR of 1.35:1. Pre-Trimmed Test Probes are also available. Electrical Specifications Description Frequency Range Minimum Typical Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: Pigtail Test Probe Cable SMA Female to Flush Cut Lead Using PE-047SR Coax, RoHS PE3CA1103 Pasternack Enterprises, Inc. • P.O. Box 16759, Irvine, CA 92623 Phone: (866) 727-8376 or (949) 261-1920 • Fax: (949)261-7451 Sales@Pasternack.com • Techsupport@Pasternack.com ©2015 Pasternack Enterprises All Rights Reserv

Open the catalog to page 1

/pel PASTERN A CK* MM THE ENGINEER'S RF SOURCE Pigtail Test Probe Cable SMA Female to Flush Cut Lead Using PE-047SR Coax, RoHS RF Cable Assemblies Technical Data Sheet PE3CA1103 Specifications by Frequency Description Frequency Mechanical Specifications Cable Assembly Cable Cable Type Impedance Inner Conductor Type Inner Conductor Material and Plating Dielectric Type Number of Shields Jacket Material Jacket Diameter Connectors PE-047SR 50 Ohms Solid Copper Clad Steel, Silver PTFE 1 Copper 0.047 in [1.19 mm] Description Connector 1 Connector 2 SMA Female Outer Conductor Material and...

Open the catalog to page 2

/pel PASTERN A CK* MM THE ENGINEER'S RF SOURCE Pigtail Test Probe Cable SMA Female to Flush Cut Lead Using PE-047SR Coax, RoHS RF Cable Assemblies Technical Data Sheet PE3CA1103 How to Order Part Number Configuration: cm = Centimeters <blank> = Inches -Length -Base Number Example: PE3CA1103-12 = 12 inches long cable Pigtail Test Probe Cable SMA Female to Flush Cut Lead Using PE-047SR Coax, RoHS from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest...

Open the catalog to page 3