CALIBRATOR RA-2
2Pages

CALIBRATOR RA-2 The calibrator mod. RA-2 produces a high-quality cold laminated sheet characterized by elasticity, low temperature and homogeneous color. It is completely designed in stainless steel for cleaning purposes. MAIN TECHNICAL FEATURES: • Micrometic adjustment of the output sheet thickness. • The support and movement transmission mechanisms are separated from the lamination sheet unit to guarantee the maximum hygiene level. • The calibration speed is controlled by an indipendent motor for the two couples of rollers with VSD. • It is suitable to work with the forming machines mod. FA/FAD, or in the stand-alone version. • It is provided with safety magnetic switches and optical sensor to adjust the sheet speed. • An inner guide belt conveys the sheet between the rollers, controlled by loop-control. • The lubricating points are placed outside the protection carter, in an easy-access position. • Fully wash-down with high-pressure water and detergent. Technologies for the food industry Pasta Technologies Group s.r.l. Via Martiri delle Foibe, 13 - 35019 Onara di Tombolo (PD) - Italy http: // www.pastatechgroup.com - E-mail: info@pastatechgroup.com

The information indicated in the chart are merely descriptive and do not represent any restriction to PTG ** Indicative production with reference to fresh pasta with humidity level equal to 32-35%. The production may change by adjusting the sheet speed at the calibrator inlet. * The dimensions are considered without unloading belt and without base, which is about 900 mm high. OPTIONAL (available on demand) AND CONFIGURATIONS: • The machine is available with more than one couple of calibrating rollers. • Pre-cutting system of the sheet. • Automatic system for the adjustment of the sheet...