Vibration and Temperature Sensor with Digital Signal Processing VTS-3D/2.x
2Pages

{{requestButtons}}

Catalog excerpts

Vibration and Temperature Sensor with Digital Signal Processing VTS-3D/2.x - 1

Vibration and Temperature Sensor with Digital Signal Processing VTS-3D/2.x Vibration and temperature sensor with digital signal processing is designed to monitor the vibration and temperature characteristics of industrial equipment. The sensor can be used as part of distributed systems for monitoring the state of machines and mechanisms, as well as an autonomous tool of emergency protection. Sensor provides • measurement and processing of vibration characteristics in three axes, • measurement of the temperature of the surface on which it is installed, and the ambient temperature (air). Functional Features of the VTS-DSP-3D / 2.x Sensor Sensor Versions VTS-DSP-3D / 2.1 - two optically isolated control outputs; VTS-DSP-3D / 2.2 - one optically isolated control output, one optically isolated input. Vibration by temperature / 2.2 with digital signal processing is The presence of the input provided andVTS-DSP-3Dsensorallows using it in two versions: designed to monitor the vibration and switching on, it can be used industrial • as a potential discrete input of the signal about machines temperature characteristics offor equipment. a steady state with a constant frequency of turns and machines and mechanisms which have The sensor can a known running-up and deceleration time;be used as part of distributed systems for monitoring the state of machines and mechanisms, as well as an autonomous means of • as a pulse input of the external speed sensor, which is necessary, first of all, for monitoring emergency protection. equipment with a variable frequency of turns. Digital Data Interface • Industrial RS485 interface provides a sensor connection up to 1 km away, even under industrial electromagnetic interference conditions; • when using standard converters of interfaces, local networks, wireless networks and the Internet network, removal of the sensor may be unlimited. Digital Signal Processing • measurement, filtering and transformation of the integral characteristics of vibration (RMS acceleration, velocity and displacement) in three axes based on the fast Fourier transform; • formation and transmission of spectrograms of the frequency representation of the vibration signal synchronously along three axes with a given frequency resolution and boundaries of the frequency band of interest; • the ability to transfer direct time domain representation of the vibration acceleration signals synchronously in three axes for in-depth processing and analysis at the top system level; • control of levels in sixteen frequency bands, with defined boundaries, warning and emergency thresholds; • formation of a state representation for exceeding the warning and emergency set points of the RMS thresholds, levels in the specified frequency bands, surface and air temperatures and transmitting it via the digital interface; • control of outputs (output) in accordance with any combination of programmable conditions. Scalable Sensor Application: • autonomous (“emergency protection relay”) - can be used to protect equipment without using any system using the control outputs for signaling or automatic shutdown; • using the sensor in the minimum configuration system via a local connection to a computer through an RS485 / USB interface converter and bundled software; • connection to existing process control systems (SCADA) • creation of a distributed, including territorial, (including remote production facilities) system of centralized monitoring of the

Open the catalog to page 1
Vibration and Temperature Sensor with Digital Signal Processing VTS-3D/2.x - 2

Interface -RS485, Modbus RTU protocol; - speed - 115200, 57600, 38400, 19200, 9600, 4800 bps; - the number of sensors connected to one line - up to 8. - line length - up to 1000 m, depending on the speed of transmission and type of cable. Control Outputs - VTS-DSP-3D / 2.1 - two control outputs; - VTS-DSP-3D / 2.2 - one control output; - optically isolated, "open collector" type. Inputs only VTS-DSP-3D / 2.2; - optically isolated. Power Supply - from 8 to 25 V DC; - Consumption current - no more than 40 mA. Operating temperature range - from -30 to 80 C; Degree of protection -IP 67...

Open the catalog to page 2

All PassatInnovations LLC catalogs and technical brochures

  1. Sluch System

    4 Pages