Earth Resistivity Meter: RM1www.pasisrl.it RM1 is a compact versatile earth resistivity meter with 24 bit data acquisition. All parameters in “stand alone” mode can easily be set using the console keyboard, even in harsh environmental conditions; connect the RM1 to your laptop via the dedicated acquisition software, and use the taylor-made measuring session (VES/ERT) to organize your in-field sessions quickly and efficiently. Applications • water surveys of the subsoil to shallow, medium and great depths • geological stratigraphy, landslide studies, etc. • groundwater contamination by salt water and / or pollutants • subsoil cavities detection • mining (sulphides, etc.) • archaeology Methodology • Vertical Electrical Soundings (VES) • Electrical Profiling (EP) • Self Potential (SP) • Induce Polarization (IP) • Electrical Resistivity Tomography (ERT, Electrical Imaging ) • 24-bit Sigma-Delta ADC + oversampling for noise reduction • A.I. (Artificial Intelligence) function with automatic setting of all acquisition parameters (V, I, Te, T0, Ti, etc.) • Standard deviation setting (a) to optimize measurement accuracy and acquisition times • Internal > 5000 measurements (standard version) • Electrical Resistivity Tomography function (ERT) - 32 el. (optional) • USB data transfer • Internal battery autonomy: > 1300 continuous measurements (electrical tomography); more than 40h works in SEV mode • Power supply from external power bank (optional) or PC (via USB) • Automatic Filtering - oversampling - 50/60 Hz noise removal • Noise reduction with stacking and average of the acquired values • Autocalibration at start-up • Connects to any external energy source - max.1000V-1A (5A opt.) • Light compact PELI IP 67 case - 270x246x123mm - 2.9kg PASI S.R.L. — Via Galliari 5/E — 10125 Torino tel. +39 011 6507033—e-mail: [email protected]

RM1 is compatible with any kind of external energizer – max. 1.000V - 1A (optional 5A) In addition to stand alone mode, RM1 can be connected to an external laptop PC thanks to its bundle software for Windows 7 (or later version), allowing you to prepare VES tables (Wenner, Schlumberger, Dipole-Dipole soundings, etc.) and also customized measuring sessions (VES/ERT). Technical specifications A-B (C1-C2) Current Circuit SWITCHING SECTION Insulation: Max. Switching Voltage: Max. Switching Current: Fully protected with Diagnostic: CURRENT MEASURING SECTION Technology: Maximum Measurable Current:...

PASI P-200 Energizer GEOPHYSICS www.pasisrl.it The P200 energizer is the perfect energy source for vertical sounding. Connect to an external 12V battery (not supplied), for a 20V to 200V supply, max 1A, in continuous current. Up to 5 units can be connected in series to the same external battery of appropriate capacity. Designed to complete the RM1 earth resistivity meter, the P200 is compatible with all P.A.S.I. geoelectrical instruments. Technical specifications • • • • • • • • • Output voltage from 20-200 V Output current guaranteed 1000 mA Indication of battery charge on three levels Resettable...

Recommended Configurations and accessories EARTH RESISTIVITY METER PASI Mod. RM1 Configuration 01: complete system with 2xP200 energizers, AB distance 600m Ves Data Invertion Software available on request