PASCHAL TG 60 PRODUCT INFORMATION

PASCHAL TG 60 Safe, fast and universal PASCHAL TG 60 shoring ensures simple, quick and safe construction of shoring towers. The shoring towers meet practically all of the requirements construction sites place on shoring towers – for building construction, civil engineering and bridge construction alike. The core elements of the PASCHAL TG 60 are the TG 60 shoring frames with integrated punched disks. These are made of steel scaffold tubes with higher strength and are stiffened with two small diagonal braces. Sophisticated structure sequences and the screwless connection technology simplify handling,...

PASCHAL TG 60 Use as shoring, reinforcement scaffolding and stair towers PASCHAL TG 60 system components can be used to systematically build not only shoring constructions, but also stair towers and reinforcement scaffolding. The permissible leg load for shoring is up to 60 kN and a type test according to DIN EN 12812:2008-12 is available. All parts have a low individual weight and integrated ladders enable safe assembly and disassembly. The pre-assembled towers can be moved by crane or with the quick-to-install castors. PASCHAL TG 60 adapts to any geometry and all structural requirements. Reinforcement...

Shoring – flat components Adapts to any geometry The modular principle of the PASCHAL TG 60 shoring system enables adaptation to any building geometry and to different formwork or support heights. All towers can be adjusted longitudinally using diagonal braces and bars in five modular formworks – the width always remains the same with the TG 60 frames. Different heights are easily achieved with a repeated extension of segments of the same system parts over and over again. Flood control reservoir, D-Querfurt; Umwelttechnik und Wasserbau GmbH, D-Blankenburg

Shoring Adapts to any geometry Cross head jack HD O-Ledger (horizontal diagonal brace) Diagonal brace ist nur in Verbindung mit der jeweilig Diese Zeichnung zu verwenden. Unabhängig davon sind die gültigen S Maße und örtliche Gegebenheiten sind vor Beginn de Firma verantwortlich auf Übereinstimmung zu prüfen. Alle Bauteile sind schub-, druck-, und zugfest miteinan Diese Zeichnung darf dritten Personen und Firmen we zur Kenntnis gegeben werden. Shoring frame TG60 0.71 x 1.09 m(base frame) Folgende Planunterlagen wurden dieser Zeichnung zu Intern geprüft: Base collar INDEX AENDERUNG Firma Company...

Shoring – linear components Any length and height is possible Linear components such as beams only require the shoring on one axis. The size and spacing of the individual towers are planned according to the load.

Special projects Inclined surfaces In the case of sloping ceilings, beams or stairways, the towers used can be combined and adjusted in different heights according to the given inclination.

Different component dimensions and changing loads from project to project require the shoring system to be adaptable with just a few different components. The TG 60 shoring frames on the front sides of the towers therefore always remain the same. In the longitudinal direction, only the bars and the diagonal braces have to be selected for the five specified modular formwork dimensions. Thanks to the modular system Quick turnaround With cyclic formwork, individual towers or tower groups can be completely repositioned without intermediate dismantling and reassembly. Castors are attached to the corners...

Adaptable Thanks to the modular system Components Reinforced concrete columns that have already been concreted in the project can also stand within a shoring tower. The prop is enclosed with the necessary frames, bars and diagonal braces. The tower can be moved by removing the bolts and diagonal braces on one side and rolling the still-U-shaped tower on castors. Heavy loads In the case of selectively very high loads, several frame levels can be combined at the front to increase the admissible capacity of the system. .Maier GmbH ostfach 1120 reuzbühlstraße 5 0 AENDERUNG Firma Company Société Projekt...

Quick Few individual parts and flexible connection technology Cross head jack HD O-Ledger (Horizontal diagonal brace) Hitting the wedge with a hammer transforms the form fit into a force fit. The face of the wedge head then lies exactly on the leg. Diagonal brace Base collar HD O-Ledger (Horizontal diagonal brace) Base plate The result of superior construction. Up to eight connections can be attached on one level at different angles in the statically ideal all-round nodes. Attachment options are provided in a modular framework dimension of 50 cm on all all-round legs. The flat punched disk prevents...

Safe assembly and disassembly through closed leading railings In addition to the high admissible capacity, the PASCHAL TG 60 shoring also ensures a high degree of occupational safety during upright assembly or disassembly. Steel decks are hung in the bars for this purpose. These steel decks are always taken upward during assembly, with the now-required railing – consisting of frames, bars and diagonal braces – having already been securely assembled during the assembly step. Firma Comp Socié Proje Proje Proje PASCHAL-Werk G.Maier GmbH 77788 Steinach Postfach 1120 77790 Steinach Kreuzbühlstraße...

Reinforcement scaffolding For working on vertical surfaces The components of the PASCHAL TG 60, additional ladders, and platforms with traps can also be used to systematically construct reinforcement scaffolding. The basic module can be increased in height in several layers. Correspondingly high additional modules allow the construction’s geometry to be adjusted in length. Cover width: Module length: Standing height Cover width: Module length: Standing height: Cover width: Module length: Standing height:

Reinforcement scaffolding For working on vertical surfaces O-Wood access deck Diagonal brace Initial standard Base plate Base collar