Modular column formwork adjustable

Product catalog summary

Specifications:
The document outlines the specifications for the adjustable Modular column formwork by PASCHAL, which is a steel frame formwork assembled using the windmill principle. The available element heights are 150 cm, 125 cm, and 100 cm, assembled based on the column height. The formwork uses a 15 mm thick phenolic resin-coated plywood facing, with a maximum concrete pressure of 60 kN/m² as per DIN 18218. Smaller element heights should be used at the bottom when assembling formwork with different heights.

Procedures:
For orders, final execution plans are requested. The formwork allows for mounting accessories like props, platform brackets, or crane lifting clamps. For enhanced concrete surface quality at panel joints, glazing tape or chamfer strips can be mounted.

Norms and Standards:
The maximum safe working pressure is specified as 35 kN/m², and the maximum concrete pressure is 60 kN/m² according to DIN 18218.

Recommendations:
It is recommended to use smaller element heights at the bottom in assembled formwork with varying heights. For improved concrete surface quality, additional materials like glazing tape or chamfer strips can be used.

Product Information:
The formwork can create square and rectangular column cross-sections in the adjustment range of 20 cm to 50 cm in 5 cm increments. More information can be found at www.paschal.de/modular-column.

Catalog excerpts

Product Information Modular column formwork adjustable

Open the catalog to page 1

Modular column formwork adjustable The adjustable Modular column formwork by PASCHAL is a steel frame formwork whose elements are assembled according to the so-called windmill principle. · Available are element heights of 150 cm; 125 cm and 100 cm, which will be assembled depending on the height of columns to be concreted. · As formwork facing a 15 mm thick, phenolic resin coated plywood is mounted in the elements. · There is a maximum concrete pressure of 60 kN / m² according to DIN 18218 admissible. In assembled formwork with different element heights the smaller heights have to be used on...

Open the catalog to page 2

Modular column formwork adjustable

Modular column formwork adjustable

Catalog excerpts

All PASCHAL-Werk G. Maier GmbH catalogs and technical brochures