Catalogs >
PASCHAL-Werk G. Maier GmbH >
LOGO.pro - White paper

LOGO.pro - White paper
6Pages

Catalog excerpts

White paper work Form n ice i Serv

LOGO.pro Optimised working with one-sided anchor technology LOGO.pro‘s one-sided anchor technology means that the tie points can be operated by just one person. This not only makes optimised working with low manpower requirements possible, but also facilitates working in confined spaces. One-sided anchor technology makes the formwork anchors easy to operate by just one person Innovative addition to the LOGO range This new wall formwork consists of a profiled, high-strength flat steel frame and it provides the same robustness and reliability as the familiar LOGO.3 wall formwork product. As...

Open the catalog to page 2

Economic and logistical benefits Our LOGO.pro formwork system with one-sided anchor technology delivers impressive user-friendly, simple operation and compatibility with existing systems. Economical formwork thanks to standard tension material PASCHAL relies on inexpensive standard tension material (DW 15 and DW20) for the one-sided formwork anchor, eliminating the need for time-consuming staking of the tie rods. There is also a free choice of tubes. Depending on requirements, these can be made of plastic or fibre cement. Compared to other solutions on the market that work with tapered...

Open the catalog to page 3

This interchangeable technology is easy to operate A particular bonus of the LOGO.pro formwork system: Depending on requirements, the system can be anchored either on one side or conventionally. Guide bushing and clamping unit Thanks to the ingenious changeover system, it is child’s play to switch the anchor points from two-sided to one-sided anchoring. The guide bushings inserted in the formwork are equipped with an appropriate diameter of access opening for DW15 and DW20 tie rods. This means that the classic type of two-sided anchoring is possible. To change over to one-sided anchoring,...

Open the catalog to page 4

One-sided anchoring For one-sided operation of the formwork anchors, the guide bushings in the outer formwork can be replaced with clamping units in just a few steps. Conversion of the outer formwork: Installation of the inner formwork: With an assembly tool, loosen the guide bushing Remove the guide bushing Turn the ring bolt by 90° Feed the tie rod, tube and guide bushing through the inner formwork Turn the ring bolt by 90° Screw the guide bushing with the assembly tool With an assembly tool, extract the guide bushing Insert the clamping unit Lock it with the assembly tool Turn the tie...

Open the catalog to page 5

Do you need further information? If you have any questions or require further, more detailed information, please contact our experts by phone or e-mail - they will be happy to help you. E-mail: kundenservice@paschal.de Phone: +49 (0) 78 32 / 71-0 We are here for you! www.paschal.com PASCHAL-Werk G. Maier GmbH · Kreuzbühlstraße 5 · 77790 Steinach · Germany Phone: +49 7832 71-0 · Fax: +49 7832 71-209 · service@paschal.de · www.paschal.com

Open the catalog to page 6

LOGO.pro - White paper 6Pages

Catalog excerpts

All PASCHAL-Werk G. Maier GmbH catalogs and technical brochures

LOGO.pro - White paper
6Pages