Press machine system
1 / 48Pages

Press machine system

Clamping Clamp the workpiece Clamp the die Clamp the tool Changing Change the workpiece Change the die Change the tool Control Control them

Press mag clamp MGP Clamping the center of the die helps to extend the dies lifetime Spring for unclamp assist (against residual magnetic flux) Total clamping force 294kN (7.35kN x 40 cores) Die displacement detection core Practical example of 2,000kN High speed press

Clamping force can be evenly applied to all over the die plate The die is stabley absorbed all over the face by the magnetic force and there is no force dispersion when clamping the die. It can restrain the gap between the machine and the die also enables the quality of the parts to improve. Mag clamp Thin type 35mm Standard 50mm Clamp force acts evenly Hydraulic clamp Hydraulic clamp model TXA Hydraulic source Not required No hydraulic unit, no piping & Mainetance free Hydraulic piping Not required Mag clamp does not need hydraulic source also it has high durability since there is no...

Suitable for the machine which cannot secure the space for a hydraulic clamp The press mag clamp absorbes and fixes the mold by the magnetic force generated from the plate and there is no space required for mounting the clamp and therefore the slide or bolster surface can be used to the maximum. Also there is no need to standardize the mold size and no need for T-slots on the machine nor U-cuts for the die. Needs T slot and U-cut Slide Hydraulic clamp model TXA T-Slot U-cut Die Space for mounting a hydraulic clamp Space for mounting a hydraulic clamp Die F-B dimension Slide area can be...

C l amp（ M ag n e t i z e d） Neodymium magnet Super strong permanent magnet Alnico magnet Polarity is inverted by electromagnetic coil Electromagnetic coil Inverts the polarity of alnico magnet Magnet core Powerfully adheres mold Effective height of magnetic flux : Approx 20mm Lines of magnetic flux 1 Electromagnetic coil is energized for 0.5 sec. 1 Electromagnetic coil is energized for 0.5 sec. 2 Polarity of alnico magnet is inverted. 2 Polarity of alnico magnet is inverted. 3 Neodymium magnet and alnico magnet become homopolar. 3 Magnetic flux of neodymium magnet and alnico magnet is not...

Pre-roller stand model With excellent rigidity better than existing Pre-roller and less displacement against the load, smoother and safer die change is achievable. Pre-roller stand model PRM Place the die on the stand by means of forklift or overhead crane 20,000kN(2,000tonf ) press machine Die 8ton 4-rows model At installation Pre-roller stand model PRM Pre-roller stand model PRM Mounting block model PRM-A Base model Mounting block PRM-A Base model 6,000kN(600tonf ) press machine 2-rows model

Roller frames 2-rows model Roller frame pitch Overall length of pre-roller stand mm Quantity of rollers Bolster height ＊1 ：Roller frame pitch for 1000mm. The mass of the bolster mounting block is not included. Roller frames 4-rows model Roller frame pitch Overall length of pre-roller stand mm Quantity of rollers Bolster height ＊2 ：Roller frame pitch for 1000mm,1400mm,Bolster height 700mm. T he mass of the bolster mounting block is not included. Roller frame pitch Overall length of pre-roller stand Die

Stamping die clamping system 4,000kN(400tonf ) Press Pascal clamp TXA ＆ TYA

Return spring Clamping stroke Safety stroke Piston Hydraulic connection port Safety stroke Clamping stroke Hydraulic connection port Return spring Bolster Manual slide, piston type of clmap. It is suitable for the die with a U-cut. Manual slide type of clamp with lever. It is suitable for the die without U-cut. Automatic slidable clamp with air cylinder. （ TXA＋Automatic slidable function ） Automatic slidable clamp with air cylinder. （ TYA＋Automatic slidable function ） model Automatic slidable clamp which utilizes the entire lower sur

3,000kN(300tonf ) Press Horizontally fold type Pre-roller PRS PRT & Die-lifter Pre-roller PRT

Pre-roller model PR（ Extension arm rollers ） Removable & fold type model One-touch operation Mounting block Mounting block Hook Heavy load type Horizontally fold type model Mounting block PRT Pillar （Fixed in the floor with anchor bolts） With DLF series, heavy dies are lifted by hydraulic force. The rollers enable operator to move the die easily and smoothly. A spring lifting roller that does not need hydraulic source. The compact design allows an easy installation just to slot it in the machine T-

Delivery record Pascal traveling clamp A die clamping system which has changed considerably the stamping style in the world. 30,000kN(3,000tonf ) Transfer press Traveling clamp 14

Pascal traveling clamp model TRA Roller chain Hydraulic hose Base block 23,000kN(2,300tonf ) Transfer press Clamp plate Die detection proximity switch

Pascal pump X63 New series of Pascal pump model X63 which pursues more reliability.

Air-driven, Compact, High performance hydraulic pump High cycle, reliable reciprocation of air and hydraulic piston ensures a repetitive suction and discharge oil process. As discharge pressure hikes up to the circuit set pressure, reciprocation goes slow eventually. Pascal pump stops at the time the discharge pressure reaches the set pressure then keeps balancing air and oil discharge pressure. At the balanced condition, Pascal pump never consumes air and there is no power loss or oil temperature rise unlike an ordinary electric motor pump. In the event of pressure drop (oil leakage) in...

Pascal control unit HCS A new, easy-to-maintain hydraulic control unit Returning oil to the tank at air bleeding Adopiting transparent pipe to return the oil from air bleeding valve to the tank, air bleeding can be done without draining the oil. Equipped with filter regulator as standard Adoption of steel tank which is strong against impact and heat Only one piping from the pump to the valve for easier servicing of the pump. Visible oil level gauge with red ball The pipe can be installed or removed easily when exchanging the pump and valve. The check valve inside the oil tank. The valve can...