PGH52
PGH52
There are three categories of part numbers: Modular, Standard, and Special. Additional gear ratios are available upon request, including 5:1, 57:1, 82:1, 114:1, 357:1, and 552:1.
- Part Numbers: Range from 52-4 to 52-684.
- Gear Ratios: Vary from 1:1 to 684:1.
- Stages: Number of stages ranges from 1 to 4.
- Max. Continuous Torque (S1): Up to 24.0 Nm.
- Max. Intermittent Torque: Up to 36.0 Nm.
- Efficiency: Ranges from 66% to 90%.
- Backlash: Between 42 and 48 arc minutes.
- Max. Axial Load (Dynamic): Up to 150 N.
- Max. Radial Load: Up to 450 N, measured 12 mm from the flange.
- Weight: Ranges from 0.45 kg to 0.99 kg.
- Gear Material: Composite and Steel (C/S).
- Length: Ranges from 53.0 mm to 99.5 mm.
Note: S1 duty cycle is based on a 3000 RPM input speed. Gear material is denoted as C for Composite and S for Steel.
The PGH52 is a planetary gearbox with composite and steel gears, offering gear ratios from 4:1 to 684:1 and a maximum torque of 36.0 Nm.
- PMDC Motor: Models include BRx52-30, BRx52-58, PM7, PM8, PM9.
- BLDC Motor: Models include PBL42-30, PBL42-50.
- AC Motor: Models include SD21, SD41.
Additional length (+L mm) varies by motor model.
PGH52 dimensions include a length of 25 ±1 mm, diameter of Ø52 mm, and other specified measurements for precise fitting.
Catalog excerpts
Planetary gearbox // Composite and steel gears Part number key Modular Technical data 1 Part number 2 Gear ratio 1 3 Stages 4 Max. continuous torque (S1) 2 6 Efficiency 7 Backlash 8 Max. axial load (dynamic) 9 Max. radial load, 12 mm from flange S1 duty cycle based on 3000 RPM input speed Gear material: C = Composite, S = Steel additional information available on request
Open the catalog to page 1All Parvalux Electric Motors Ltd catalogs and technical brochures
SD38 2 speed1 Page
Trusted in Healthcare17 Pages
PBL42-351 Page
PBL60-701 Page
PBL60-501 Page
PBL70-801 Page
PBL70-701 Page
BLx60-401 Page
PGS621 Page
PGS711 Page
PGS801 Page
PGS901 Page
PGH421 Page
GB91 Page
GB121 Page
GB281 Page
M Box1 Page
S Box1 Page
GB581 Page
Door automation solutions9 Pages
Materials handling solutions5 Pages
Mobility solutions5 Pages
Product Range70 Pages
PBL86-801 Page
PBL86-55 B1 Page
BRx42-401 Page
SC 50/15 controller1 Page
GB12 60:1 Bronze1 Page
PGH42 1470:11 Page
BRx42-25 24V 3000 RPM1 Page
- Electromotor
- DC electromotor
- Multipole motor
- Electric gearmotor
- Asynchronous motor
- Electromotor for industrial applications
- EC motor
- 24 V motor
- Right angle gearhead
- Direct current gear-motor
- 2-pole motor
- Permanent magnet motor
- Single-stage gearhead
- Right angle electric gearmotor
- Motor controller
- Solid-shaft gear-motor
- 48 V motor
- IP54 motor
- Modular gearhead
- Small motor