*mydirectindustry

PBL86-80

Product catalog summary

Overview: The PBL86-80 BLDC motor is a brushless DC motor with an 86 mm frame and an 80 mm stack. It offers customizable options such as shaft length, diameter, and special windings for specific voltages and speeds. The motor is built to comply with EN60034-1:2010 performance tolerances.

Specifications:

Part Number: 776625
Nominal Power: 586 W
Nominal Voltage: 48 V
No Load Speed: 4192 rpm
No Load Current: 1.9 A
Nominal Speed: 4000 rpm
Nominal Continuous Torque (S1): 1.4 Nm
Nominal Continuous Current (S1): 14.4 A
Max Intermittent Torque (S2 - 15 minutes): 2.45 Nm
Stall Current: 116 A
Stall Torque: 12.7 Nm
Stack Length: 80 mm
Maximum Efficiency: 83%
Resistance (Ra): 0.057 Ω
Inductance (Rl): 161.3 mH
Speed Constant: 87.9 rpm/V
Torque Constant: 0.11 Nm/A
Speed Torque Gradient: 345.6 rpm/Nm
Rotor Inertia: 2.9 x 10^-4 Kgm²
Weight: 4.20 Kg

Thermal and Mechanical Data:

Ambient Temperature: 40°C
Radial Load: 350 N at 15 mm from flange
Radial Play: 0.06 mm at 450 g
Axial End Play: 0.08 mm at 450 g

Other Data:

Number of Poles: 8
Winding Type: Delta
Hall Effect Angle: 120° (electrical angle)
IP Rating: IP54
Enclosure: Enclosed
Insulation Class: B

Additional Components:

Brake Options: 1.5, 3.0
Encoder: Optical
Controller Options: SC 50/15, ESCON, EPOS
Gearbox Options: GB9, GB12, PGS80, PGS90

Dimensions: All dimensions are in mm. Additional length may be required for mounting flange between components.

Catalog excerpts

BLDC motor Part number key Modular Standard Calculated data Available on request: custom shaft length and diameter, shaft on both sides, special windings for specific voltages and speed, higher IP protection class, custom flanges and connectors All products are built in accordance to performance tolerances from EN60034-1:2010. As continuous improvement, Parvalux periodically test their product range to ensure test results are as accurate as possible and are therefore subject to change. Please ensure you are using the latest datasheets found on our website Technical data 1 Part number 7 Nominal continuous torque (S1) 8 Nominal continuous current (S1) 9 Max Intermittent torque (S2 - 15 minutes) 18 Speed torque gradient 19 Rotor inertia 20 Weight 17 Thermal data 21 Ambient temperature 22 Radial load [distance from flange] Other data 25 Number of poles +L mm = approximate added length* 27 Hall effect angle (electrical angle) 28 IP Rating Encoder Optical Controller SC 50/15 ESCON EPOS *additional length may also be required for mounting flange between components additional information available on req

Open the catalog to page 1