BLDC motor Part number key Modular Standard Calculated data Available on request: custom shaft length and diameter, shaft on both sides, special windings for specific voltages and speed, higher IP protection class, custom flanges and connectors All products are built in accordance to performance tolerances from EN60034-1:2010. As continuous improvement, Parvalux periodically test their product range to ensure test results are as accurate as possible and are therefore subject to change. Please ensure you are using the latest datasheets found on our website 4 No load speed 5 No load current 7 Nominal continuous torque (S1) 8 Nominal continuous current (S1) 9 Max Intermittent torque (S2 - 15 minutes) 18 Speed torque gradient 19 Rotor inertia 20 Weight 17 Thermal data 21 Ambient temperature Mechanical data 22 Radial load [distance from flange] Modular system Other data 25 Number of poles +L mm = approximate added length* 27 Hall effect angle (electrical angle) 28 IP Rating Encoder Optical Controller SC 50/15 ESCON EPOS *additional length may also be required for mounting flange between components additional information available on