BLDC motor Part number key Modular Standard Calculated data Available on request: custom shaft length and diameter, shaft on both sides, special windings for specific voltages and speed, higher IP protection class, custom flanges and connectors All products are built in accordance to performance tolerances from EN60034-1:2010. As continuous improvement, Parvalux periodically test their product range to ensure test results are as accurate as possible and are therefore subject to change. Please ensure you are using the latest datasheets found on our website Technical data 1 Part number 7 Nominal continuous torque (S1) 8 Nominal continuous current (S1) 9 Max Intermittent torque (S2 - 15 minutes) 10 Stall current 15 Rl 16 Speed constant 17 Torque constant 18 Speed torque gradient 19 Rotor inertia 20 Weight 17 Thermal data 22 Ambient temperature Mechanical data 23 Radial load [distance from flange] Other data 26 Number of poles +L mm = approximate added length* 28 Hall effect angle (electrical angle) 29 IP Rating Encoder Optical Controller SC 50/15 ESCON EPOS *additional length may also be required for mounting flange between components additional information available on