Model 3100 Single Knife Cutter The model 3100 is a hydraulically driven linear feed single knife cutter that can cut most rolled products with ease, including textiles, nonwovens, plastics, rubber, pressure sensitive tape, film and more. Complete sequence programming makes for smooth operation- no lost time, no mistakes and no missed steps. With the Model 3100 you’re in control of entry speed, cut speed, knife speed, material speed, and direction. The machine’s knife positioning system, controlled through the PLC, holds a standard tolerance of +/-.005 inches allowing jobs to be completed accurately the first time through. The counter/totalizer package accommodates up to ten different slit widths with a cycle shutdown when the quantities are reached. Up to 1000 password protected recipes can be programmed to make start up fast and easy. Slitter Rewinder and Converting © Parkinson Technologies Inc. Dusenbery® is a registered trademark of Parkinson Technologies.

Model 3100 Single Knife Cutter Standard Capabilities Laser Alignment Assembly Spray Mist System JudAir Chuck Piggyback Gringing System • Two speed knife entry system • Electronic digital knife positioning preselection in increments of .001” and holding tolerances of +/- .005” • Piggyback grinding system on the carriage grinds in the rear position or while cutting for increased productivity • Grinding mode selector, continuous or programmable in the back position • 4-jaw Universal chuck creates positive gripping of roll and core • Linear ball bearing design for strong and smooth operation • Manually...