Plus should not be used for live swivel applications. The outside diameter of the tubing to be used with the > fitting is marked on the release button. > Ready-to-use compact one-piece fitting for use with most thermoplastic tubing. This fitting is specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important. No special tools are needed for assembly; just insert the tubing until it bottoms. Radial claws on the stainless steel grab ring grip the tubing securely to provide retention. Brass Male pipe threads come standard with a white acrylic sealant pre-applied ("W" prefix) swivels are featured on all male pipe threaded shapes for installation in tight places and for precise positioning. Prestolok 1. Cut thermoplastic tubing squarely, using Parker Tube Cutter PTC-001. Be certain the port or mating part is clean and free of debris.2. Insert tubing into fitting until it bottoms. A slight twisting motion will ease the insertion. Pull on tubing to verify it is properly retained in the fitting.3. To disassemble, simply push the release button against the body and remove tubing. > By part number and name. Prestolok Plus Bodies: CA377, CA360, CA345O-Ring: Nitrile (other compounds available on request)Release Button: Polyacetal Grab Ring: Stainless Steel > Part numbers are constructed from symbols that identify the style and size of the fitting. The first series of numbers and letters identify the style and type fitting. The second series of numbers describe the size. > Prestolok Plus is designed to be used with the followingParker Hannifin Parflex Division tubing.Tubing Series Tubing Material > ELinear Low Density Polyethylene PPPolypropylene > NPlasticized Polyamide (Nylon) > NRUnplasticized Polyamide (Rigid Nylon) UPolyurethane 90 Durometer Shore A HUPolyurethane 95 Durometer Shore AOther materials: Polyurethane 85 Durometer Shore A Applications > Tube sizes are determined by the number of sixteenths of an inch in the tube O.D. and service conditions vary and therefore the use of a tube support may be required for any 85A PU tubing.The following commercially available O.D. ֖ I.D. 85A tubing sizes > Fitting configurations and/or sizes other than those shown in the catalog can be furnished. It is suggested that a print or sketch be submitted with the inquiry. require the use of a tube support regardless of application. 5/32 Ԗ 3/32 3/16Ԕ 1/8֔1/4 - .170Ԕ1/4 Ԗ 3/165/16Ԕ 1/4֔ 3/8 Ԗ 5/161/2Ԕ 3/8֔ > Only items priced in current supplementary price list PL3501 are carried in stock. Price and delivery for non-stock items furnished on request for specified quantity. > Prestolok Plus : Zero to 200F at up to 300 PSI depending on tubing being used.Vacuum applications are dependent upon temperature and type of tubing used. > Parker Hannifin Corporation Parker Brass Products Division Otsego, Michigan 3501E-PLP size="-1">

4 Parker Hannifin Corporation Parker Brass Products Division Otsego, Michigan size="-4">

Parker Hannifin Corporation Parker Brass Products Division Otsego, Michigan size="-2">